Changes

To achieve communication between your devices, which are connected to routers through serial port, apply this configuration. In this example RS232 will act as both, Master and Slave. Configuration on both devices is almost identical except '''Client''' and '''Server''' part, where they are reversed. In order to find these settings in routers WebUI go to '''Services > RS232/RS485 > RS232'''  

To achieve communication between your devices, which are connected to routers through serial port, apply this configuration. In this example RS232 will act as both, Master and Slave. Configuration on both devices is almost identical except '''Client''' and '''Server''' part, where they are reversed. In order to find these settings in routers WebUI go to '''Services > RS232/RS485 > RS232'''  

[[File:Networking_rut955_configuration_example_bidirectional_serial_comunication_over_tcp_rut_configuration.png|border|class=tlt-border|1100x1100px]]

[[File:Configuration1-2.png|thumb]border|class=tlt-border|1100x1100px]]

#'''Enable''' Serial port

#'''Enable''' Serial port

----

----

After finishing serial port configuration add interfaces through which routers will be communicating, You can add IP address that will be allowed to connect or enter 0.0.0.0/0 to allow all connections coming through correct port.

After finishing serial port configuration add interfaces through which routers will be communicating, You can add IP address that will be allowed to connect or enter 0.0.0.0 to allow all connections coming through correct port.

[[File:Networking_rut955_configuration_example_bidirectional_serial_comunication_over_tcp_allow.png|border|class=tlt-border]]

[[File:Ipfilter.jpg]]

==Testing configuration==

==Testing configuration==