0
edits
Changes
Template:Networking RUTX configuration example cisco ipsec (view source)
Revision as of 10:44, 2 April 2020
, 10:44, 2 April 2020→Cisco configuration
# Write '''Pre shared key''' (a shared password used for authentication between the peers. The value of this field must match on both instances).
# Write '''Pre shared key''' (a shared password used for authentication between the peers. The value of this field must match on both instances).
# Set '''Local identifier''' (device identifier for IPsec tunnel, write RUTX LAN IP address).
# Set '''Local identifier''' (device identifier for IPsec tunnel, write RUTX LAN IP address).
# Set '''Remote identifier''' (remote address of the remote peer, write Cisco LAN IP address).
# Set '''Remote identifier''' (remote device identifier for IPsec tunnel, write Cisco LAN IP address).
# Write '''Local subnet''' (an IP address/Subnet mask of the router on which the IPsec instance is configured).
# Write '''Local subnet''' (an IP address/Subnet mask of the router on which the IPsec instance is configured).
# Write '''Remote subnet''' (LAN IP address/Subnet mask of the Cisco router).
# Write '''Remote subnet''' (LAN IP address/Subnet mask of the Cisco router).
# Select '''Group: Group''' (5).
# Select '''Group: Group''' (5).
When you are do with '''IPsec Profiles''', save settings, go to '''Site-to-Site''' settings and apply the following configuration:
When you are done with '''IPsec Profiles''', save settings, go to '''Site-to-Site''' settings and apply the following configuration:
[[File:Networking_rutxxx_configuration_example_ipsec_cisco_s2s_v2.png|border|class=tlt-border]]
[[File:Networking_rutxxx_configuration_example_ipsec_cisco_s2s_v2.png|border|class=tlt-border]]
