Difference between revisions of "Template:Networking device manual powering options passive poe"

From Teltonika Networks Wiki
Line 4: Line 4:
 
'''(Do not use with other ports!)'''
 
'''(Do not use with other ports!)'''
  
[[File:{{{file_lan1}}}]]
+
[[File:{{{file_lan1}}}|{{{size_lan1}}}px]]
  
 
<font size="-1">
 
<font size="-1">

Revision as of 13:56, 6 April 2020

Passive PoE

The device may also be powered by an Ethernet cable via the LAN1 port:
(Do not use with other ports!)

[[File:{{{file_lan1}}}|{{{size_lan1}}}px]]

  • The device is NOT COMPLIANT with the IEEE 802.3af-2003 standard: powering the device from an IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard.
  • The device is NOT COMPLIANT with the IEEE 802.3at standard: it cannot power other devices over Ethernet.

RJ45 pinout:
Pin 10/100 mode B, DC on spares T568A Color T568B Color Pins on plug face (socket is reversed)
1 TX+ Poe white green stripe.png
white/green stripe
Poe white orange stripe.png
white/orange stripe
Poe rj45 connector.png
2 TX- Poe solid green.png
green solid
Poe solid orange.png
orange solid
3 RX+ Poe white orange stripe.png
white/orange stripe
Poe white green stripe.png
white/green stripe
4 DC+ 9-30 VDC Poe solid blue.png
blue solid
Poe solid blue.png
blue solid
5 DC+ 9-30 VDC Poe white blue stripe.png
white/blue stripe
Poe white blue stripe.png
white/blue stripe
6 RX- Poe solid orange.png
orange solid
Poe solid green.png
green solid
7 DC- Poe white brown stripe.png
white/brown stripe
Poe white brown stripe.png
white/brown stripe
8 DC- Poe solid brown.png
brown solid
Poe solid brown.png
brown solid