Difference between revisions of "Template:Networking device manual powering options passive poe"

From Teltonika Networks Wiki
Line 1: Line 1:
 
==Passive PoE==
 
==Passive PoE==
  
The device may also be powered by an Ethernet cable via the <b>{{#ifeq:{{{series}}}|TRB1xx|LAN|LAN1}}</b> port:<br>
+
The device may also be powered by an Ethernet cable via the <b>{{#ifeq:{{{series}}}|RUT2xx,TRB1xx|LAN|LAN1}}</b> port:<br>
 
'''(Do not use with other ports!)'''
 
'''(Do not use with other ports!)'''
  

Revision as of 16:28, 14 April 2020

Passive PoE

The device may also be powered by an Ethernet cable via the LAN1 port:
(Do not use with other ports!)

[[File:{{{file_lan1}}}|{{{size_lan1}}}px]]

  • The device is NOT COMPLIANT with the IEEE 802.3af-2003 standard: powering the device from an IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard.
  • The device is NOT COMPLIANT with the IEEE 802.3at standard: it cannot power other devices over Ethernet.

RJ45 pinout:
Pin 10/100 mode B, DC on spares T568A Color T568B Color Pins on plug face (socket is reversed)
1 TX+ Poe white green stripe.png
white/green stripe
Poe white orange stripe.png
white/orange stripe
Poe rj45 connector.png
2 TX- Poe solid green.png
green solid
Poe solid orange.png
orange solid
3 RX+ Poe white orange stripe.png
white/orange stripe
Poe white green stripe.png
white/green stripe
4 DC+ 9-30 VDC Poe solid blue.png
blue solid
Poe solid blue.png
blue solid
5 DC+ 9-30 VDC Poe white blue stripe.png
white/blue stripe
Poe white blue stripe.png
white/blue stripe
6 RX- Poe solid orange.png
orange solid
Poe solid green.png
green solid
7 DC- Poe white brown stripe.png
white/brown stripe
Poe white brown stripe.png
white/brown stripe
8 DC- Poe solid brown.png
brown solid
Poe solid brown.png
brown solid