Template:Networking rut240 manual modbus modbus tcp set parameters table

From Teltonika Networks Wiki
Revision as of 06:26, 15 October 2020 by Dziugas (talk | contribs) (Created page with "<table class="nd-othertables"> <tr> <th width="350">value to set</th> <th width="180">register address</th> <th width="150">register value</th>...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
value to set register address register value description
Hostname 7 Hostname Changes hostname
Device name 71 Device name Changes device name
Switch WiFi (ON/OFF*) 203 1 | 0 Turns WiFi ON or OFF
Switch mobile data connection (ON/OFF*) 204 1 | 0 Turns mobile data connection ON or OFF
Reboot 206 1 Reboots the router
Change APN 207 APN code Changes APN.
The number of input registers may vary depending on the length of the APN, but the very first byte of the set APN command has to be specified as 1
Switch PIN4 state (ON/OFF*) 325 1 | 0 Turns PIN4 state ON or OFF