Template:Networking rut2m manual input output status

From Teltonika Networks Wiki
Revision as of 11:57, 31 January 2022 by Gytispieze (talk | contribs) (Created page with "<pre> ioman.gpio.din1 - 4PIN input ioman.gpio.dout1 - 4PIN output </pre> Call command <b>ubus call <u>value</u> status </b>: root@Teltonika-{{{name}}}:~# ubus call ioman.gp...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
ioman.gpio.din1  - 4PIN input
ioman.gpio.dout1 - 4PIN output

Call command ubus call value status :

root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.din1 status
{
        "value": "0",
        "direction": "in",
        "bi_dir": false,
        "invert_input": false
}
  • din1 is the input:
    • "value": "0" means low level state.
    • "value": "1" means high level state.
  • dout1 is the output:
    • "value": "0" means low level state.
    • "value": "1" means high level state.