Difference between revisions of "Template:Networking rut2xx first start hardware installation"

From Teltonika Networks Wiki
m (Protected "Template:Networking rut2xx first start hardware installation" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
Line 5: Line 5:
 
     <li>Attach {{#ifeq: {{{name}}} | RUT240 | LTE and WiFi | 3G and WiFi}} antennas</li>
 
     <li>Attach {{#ifeq: {{{name}}} | RUT240 | LTE and WiFi | 3G and WiFi}} antennas</li>
 
     <li>Connect the power adapter to the power socket located on the front panel of the device. Then plug the other end of the power adapter into a wall socket.</li>
 
     <li>Connect the power adapter to the power socket located on the front panel of the device. Then plug the other end of the power adapter into a wall socket.</li>
     <li>Connect to the device wirelessly (SSID: {{{name}}}_****) or use an Ethernet cable.</li>
+
     <li>Connect to the device wirelessly (SSID: {{{name}}}_****).</li>
 
</ol>
 
</ol>

Revision as of 08:58, 20 February 2019

Hardware installation

  1. Remove the SIM card slot tray with the pin needle. Insert your SIM card and push the tray back into the router. Correct SIM card orientation can be seen in the figure below:
    [[File:{{{file_sim}}}|{{{size_sim}}}px]]
  2. Attach 3G and WiFi antennas
  3. Connect the power adapter to the power socket located on the front panel of the device. Then plug the other end of the power adapter into a wall socket.
  4. Connect to the device wirelessly (SSID: {{{name}}}_****).