Difference between revisions of "Template:Networking rut2xx manual modbus modbus tcp set parameters table"

From Teltonika Networks Wiki
Line 10: Line 10:
 
       <td>7</td>
 
       <td>7</td>
 
       <td>Hostname</td>
 
       <td>Hostname</td>
         <td><Changes hostname</td>
+
         <td>Changes hostname</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 16: Line 16:
 
       <td>71</td>
 
       <td>71</td>
 
       <td>Device name</td>
 
       <td>Device name</td>
         <td><Changes device name</td>
+
         <td>Changes device name</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>

Revision as of 11:04, 15 July 2020

value to set register address register value description
Hostname 7 Hostname Changes hostname
Device name 71 Device name Changes device name
Switch WiFi (ON/OFF*) 203 1 | 0 Turns WiFi ON or OFF
Switch mobile data connection (ON/OFF*) 204 1 | 0 Turns mobile data connection ON or OFF
Reboot 206 1 Reboots the router
Change APN 207 APN code Changes APN.
The number of input registers may vary depending on the length of the APN, but the very first byte of the set APN command has to be specified as 1
Switch PIN4 state (ON/OFF*) 325 1 | 0 Turns PIN4 state ON or OFF