Editing Template:Networking rut2xx manual modbus modbus tcp table

<table class="nd-mantable">
    <tr>
        <th>field name</th>
       	<th>value</th>
       	<th>description</th>
    </tr>
    <tr>
      	<td>Enable</td>
       	<td>yes | no; Default: <b>none</b></td>
       	<td>Toggles Modbus TCP ON or OFF</td>
    </tr>
    <tr>
      	<td>Port</td>
       	<td>integer [0..65535]; Default: <b>none</b></td>
       	<td>Specifies which port will be used for Modbus communication</td>
    </tr>
    <tr>
    	<td>Allow Remote Access</td>
        <td>yes | no; Default: <b>no</b></td>
        <td>Allows remote Modbus connections by adding an exception to the device's firewall on the port specified in the field above</td>
    </tr>
    <tr>
    	<td>Mobile Traffic Usage Logging</td>
        <td>yes | no; Default: <b>no</b></td>
        <td>Enables Mobile Traffic Usage Logging (can also be enabled from <b>Status → Mobile Traffic → Configuration</b>). <br> This is required in order to read mobile data usage information from Modbus registers</td>
    </tr>
</table>