Editing Template:Networking rut2xx manual modbus modbus tcp table

Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
 
<table class="nd-mantable">
 
<table class="nd-mantable">
 
     <tr>
 
     <tr>
         <th>Field</th>
+
         <th>field name</th>
       <th>Value</th>
+
       <th>value</th>
       <th>Description</th>
+
       <th>description</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
       <td>Enable</td>
 
       <td>Enable</td>
       <td>yes | no; default: <b>none</b></td>
+
       <td>yes | no; Default: <b>none</b></td>
       <td>Turns Modbus TCP on or off.</td>
+
       <td>Toggles Modbus TCP ON or OFF</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
       <td>Port</td>
 
       <td>Port</td>
       <td>integer [0..65535]; default: <b>none</b></td>
+
       <td>integer [0..65535]; Default: <b>none</b></td>
       <td>TCP port used for Modbus communications.</td>
+
       <td>Specifies which port will be used for Modbus communication</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
     <td>Allow Remote Access</td>
 
     <td>Allow Remote Access</td>
         <td>yes | no; default: <b>no</b></td>
+
         <td>yes | no; Default: <b>no</b></td>
         <td>Allows remote Modbus connections by adding an exception to the device's firewall on the port specified in the field above.</td>
+
         <td>Allows remote Modbus connections by adding an exception to the device's firewall on the port specified in the field above</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
     <td>Mobile Traffic Usage Logging</td>
 
     <td>Mobile Traffic Usage Logging</td>
         <td>yes | no; default: <b>no</b></td>
+
         <td>yes | no; Default: <b>no</b></td>
         <td>Enables Mobile Traffic Usage Logging (can also be enabled from <b>Status → Mobile Traffic → [[{{{name}}}_Mobile_Traffic#Configuration|Configuration]]</b>). <br> This is required in order to read mobile data usage information from Modbus registers.</td>
+
         <td>Enables Mobile Traffic Usage Logging (can also be enabled from <b>Status → Mobile Traffic → [[{{{name}}}_Mobile_Traffic#Configuration|Configuration]]</b>). <br> This is required in order to read mobile data usage information from Modbus registers</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>

Please note that all contributions to Teltonika Networks Wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see Teltonika Networks Wiki:Copyrights for details). Do not submit copyrighted work without permission!

Cancel Editing help (opens in new window)