Template:Networking rut2xx manual modbus modbus tcp table
From Teltonika Networks Wiki
| field name | value | description |
|---|---|---|
| Enable | yes | no; Default: none | Toggles Modbus TCP ON or OFF |
| Port | integer [0..65535]; Default: none | Specifies which port will be used for Modbus communication |
| Allow Remote Access | yes | no; Default: no | Allows remote Modbus connections by adding an exception to the device's firewall on the port specified in the field above |
| Mobile Traffic Usage Logging | yes | no; Default: no | Enables Mobile Traffic Usage Logging (can also be enabled from Status → Mobile Traffic → [[{{{name}}}_Mobile_Traffic#Configuration|Configuration]]). This is required in order to read mobile data usage information from Modbus registers |
