Template:Networking rut2xx manual modbus modbus tcp table

From Teltonika Networks Wiki
Revision as of 13:20, 5 December 2018 by Dziugas (talk | contribs)

field name value description
Enable yes | no; Default: none Toggles Modbus TCP ON or OFF
Port integer [0..65535]; Default: none Specifies which port will be used for Modbus communication
Allow Remote Access yes | no; Default: no Allows remote Modbus connections by adding an exception to the device's firewall on the port specified in the field above
Mobile Traffic Usage Logging yes | no; Default: no Enables Mobile Traffic Usage Logging (can also be enabled from Status → Mobile Traffic → [[{{{name}}}_Mobile_Traffic#Configuration|Configuration]]).
This is required in order to read mobile data usage information from Modbus registers