Template:Networking rut2xx manual modbus modbus tcp table

Field Value Description
Enable yes | no; default: none Turns Modbus TCP on or off.
Port integer [0..65535]; default: none TCP port used for Modbus communications.
Allow Remote Access yes | no; default: no Allows remote Modbus connections by adding an exception to the device's firewall on the port specified in the field above.
Mobile Traffic Usage Logging yes | no; default: no Enables Mobile Traffic Usage Logging (can also be enabled from Status → Mobile Traffic → [[{{{name}}}_Mobile_Traffic#Configuration|Configuration]]).
This is required in order to read mobile data usage information from Modbus registers.