Changes

Template:Networking rut2xx manual network (view source)

Revision as of 13:06, 19 August 2021

2,972 bytes removed ,  13:06, 19 August 2021
no edit summary
Line 1: Line 1:  +
{{Template: Networking_rutos_manual_fw_disclosure
 +
| fw_version = RUT2XX_R_00.01.14.3
 +
}}
 +
 
==Summary==
 
==Summary==
    
The <b>Network</b> page contains information related to the device's networking features. This chapter is an overview of the Network page in {{{name}}} devices.
 
The <b>Network</b> page contains information related to the device's networking features. This chapter is an overview of the Network page in {{{name}}} devices.
   −
==Mobile==
+
{{Template:Networking_rutxxx_manual_network_mobile_{{{mobile}}}
−
 
+
| name = {{{name}}}  
−
The <b>Mobile</b> section displays information about the mobile connection and the SIM card in use. The figure below is an example of the Mobile page:
+
| file_mobile = Networking_rutxxx_manual_network_mobile_information_3g_v2.png
−
 
+
}}
−
[[File:Networking_rutxxx_manual_network_mobile_information_4g_v2.png]]
  −
 
  −
<table class="nd-othertables">
  −
    <tr>
  −
        <th width="250">field name</th>
  −
        <th width="900">description</th>
  −
    </tr>
  −
    <tr>
  −
        <td>Data connection state</td>
  −
        <td>Indicates whether the device has an active mobile data connection</td>
  −
    </tr>
  −
    <tr>
  −
        <td>IMEI</td>
  −
        <td>The IMEI (International Mobile Equipment Identity) is a unique 15 decimal digit number used to identify cellular modules. GSM network operators use the IMEI to identify devices in their networks</td>
  −
    </tr>
  −
    <tr>
  −
        <td>IMSI</td>
  −
        <td>The IMSI (international mobile subscriber identity) is a unique 15 decimal digit (or less) number used to identify the user of a cellular network</td>
  −
    </tr>
  −
    <tr>
  −
        <td>ICCID</td>
  −
        <td>SIM card's ICCID is a unique serial number used to identify the SIM chip</td>
  −
    </tr>
  −
    <tr>
  −
        <td>SIM card state</td>
  −
        <td>The current SIM card state. Possible values are:<br>
  −
            <ul>
  −
                <li><b>Ready</b> - SIM card is inserted and ready to be used</li>
  −
                <li><b>Inserted</b> - SIM card is inserted</li>
  −
                <li><b>Not inserted</b> - SIM card is not inserted</li>
  −
                <li><b>Unknown</b> - unable to obtain SIM card state value. Possible communication issue between the the device and the modem</li>
  −
            </ul>
  −
        </td>
  −
    </tr>
  −
    <tr>
  −
        <td>Signal strength</td>
  −
        <td>Received signal strength indicator (<b>[[RSSI]]</b>) measured in dBm. Values closer to 0 indicate a better signal strength</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Cell ID</td>
  −
        <td>The ID of the cell that the modem is currently connected to</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Signal level measurements</td>
  −
        <td>Overall signal quality is defined by different measurements for different connection types. Short explanations and recommendations are provided below. Click <b>[[Mobile Signal Strength Recommendations|here]]</b> for more in-depth information or click on one of the links below:
  −
            <ul>
  −
                <li><b>4G</b>
  −
                    <ul>
  −
                        <li>[[RSRP and RSRQ|RSRP]] - reference signal received power, measured in dBm. Values closer to 0 indicate better signal strength</li>
  −
                        <li>[[RSRP and RSRQ|RSRQ]] - reference signal received quality, measured in dB. Values closer to 0 indicate a better rate of information transfer</li>
  −
                        <li>[[SINR]] - signal-to-interference-plus-noise ratio, measured in dB. Higher values indicate a better rate of information transfer</li>
  −
                    </ul>
  −
                </li>
  −
                <li><b>3G</b>
  −
                    <ul>
  −
                        <li>[[EC/IO]] - downlink carrier-to-interference ratio. Values range from -20 to 0 (closer to 0 indicates better signal quality/cleanliness)</li>
  −
                        <li>[[RSCP]] - received signal code power. Values range from -124 to 0 (closer to 0 indicates better signal stength)</li>
  −
                    </ul>
  −
                </li>
  −
                <li><b>2G</b>
  −
                    <ul>
  −
                        <li>[[RSSI]] - received signal strength indicator, measured in dBm. Values closer to 0 indicate better signal strength</li>
  −
                    </ul>
  −
                </li>
  −
            </ul>
  −
        </td>
  −
    </tr>
  −
    <tr>
  −
        <td>Operator</td>
  −
        <td>Network operator's name</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Operator state</td>
  −
        <td>Shows whether the network has currently indicated the registration of the mobile device. Possible values are:
  −
            <ul>
  −
                <li><b>Unregistered</b> - not registered to a network and the device is not currently searching for a new operator to register to</li>
  −
                <li><b>Registered (home)</b> - registered, home network</li>
  −
                <li><b>Searching</b> - not registered to a network, but the device is currently searching for a new operator to register to</li>
  −
                <li><b>Network denied</b> - registration to network denied by operator</li>
  −
                <li><b>Unknown</b> - operator state is currently unknown</li>
  −
                <li><b>Registered (roaming)</b> - registered to network, roaming conditions</li>
  −
            </ul>
  −
        </td>
  −
    </tr>
  −
    <tr>
  −
        <td>Connection type</td>
  −
        <td>Mobile connection connection type. Possible values are:
  −
            <ul>
  −
                <li> <b>2G</b>: 2G (GSM), 2G (GPRS), 2G (EDGE)</li>
  −
                <li> <b>3G</b>: 3G (WCDMA), 3G (HSDPA), 3G (HSUPA), 3G (HSPA), 3G (HSPA+), 3G (DC-HSPA+), 3G (HSDPA+HSUPA), UMTS</li>
  −
                <li> <b>4G</b>: 4G (LTE)</li>
  −
                <li> <b>N/A</b> - not possible to determine at the moment</li>
  −
            </ul>
  −
        </td>
  −
    </tr>
  −
    <tr>
  −
        <td>Connected band</td>
  −
        <td>Currently used frequency band. For more information on supported frequency bands, <b>[[{{{name}}} supported frequency bands|click here]]</b></td>
  −
    </tr>
  −
    <tr>
  −
        <td>Bytes received</td>
  −
        <td>Amount of data received through the mobile interface</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Bytes sent</td>
  −
        <td>Amount of data sent through the mobile interface</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Restart Modem</td>
  −
        <td>Reboots the device's cellular module</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Restart Connection</td>
  −
        <td>Restarts the mobile connection</td>
  −
    </tr>
  −
    <tr>
  −
        <td>(Re)register</td>
  −
        <td>Registers to the mobile network</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Refresh</td>
  −
        <td>Refreshes all information fields in the page</td>
  −
    </tr>
  −
</table>
  −
 
      
{{Template:Networking_{{lc:{{{series}}}}}_manual_network_wan
 
{{Template:Networking_{{lc:{{{series}}}}}_manual_network_wan
 
| name    = {{{name}}}
 
| name    = {{{name}}}
−
| file_wan = {{{file_wan}}}
+
| file_wan = Networking_rut2xx_manual_network_wan_information_v1.png
 
}}
 
}}
   −
{{#ifeq: {{{series}}} | RUT8xx
+
{{Template:Networking_rutxxx_manual_network_lan
−
|
+
| name                = {{{name}}}
−
| {{Template:Networking_rutxxx_manual_network_lan
+
| file_lan_information = Networking_rutxxx_manual_network_lan_lan_information_v1.png
−
    | name                = {{{name}}}
+
| file_dhcp            = Networking_rutxxx_manual_network_lan_dhcp_leases_v1.png
−
    | file_lan_information = {{{file_lan_information}}}
+
| file_lan_ports      = Networking_rut2xx_manual_network_lan_ports_v1.png
−
    | file_dhcp            = {{{file_dhcp}}}
  −
    | file_lan_ports      = {{{file_lan_ports}}}
  −
  }}
   
}}
 
}}
   Line 160: Line 36:  
<table class="nd-othertables">
 
<table class="nd-othertables">
 
     <tr>
 
     <tr>
−
         <th width=250>Field name</th>
+
         <th width="250">Field name</th>
−
         <th width=900>Description</th>
+
         <th width="900">Description</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 182: Line 58:  
<table class="nd-othertables">
 
<table class="nd-othertables">
 
     <tr>
 
     <tr>
−
         <th width=250>Field name</th>
+
         <th width="250">Field name</th>
−
         <th width=900>Description</th>
+
         <th width="900">Description</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>SSID</td>
 
         <td>SSID</td>
−
         <td>The broadcasted SSID (Service Set Identifier) of the wireless network</td>
+
         <td>The broadcasted SSID (Service Set Identifier) of the wireless network.</td>
 
     </tr>
 
     </tr>
 
<tr>
 
<tr>
 
         <td>Mode</td>
 
         <td>Mode</td>
−
         <td>Connection mode. Can either be Access Point (AP) or Client. In AP mode others can connect to this router's wireless connection. In client mode router connects to other wireless networks</td>
+
         <td>Connection mode. Can either be Access Point (AP) or Client. In AP mode others can connect to this router's wireless connection. In client mode router connects to other wireless networks.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Encryption</td>
 
         <td>Encryption</td>
−
         <td>The type of WiFi encryption used</td>
+
         <td>The type of WiFi encryption used.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Wireless MAC</td>
 
         <td>Wireless MAC</td>
−
         <td>The MAC (Media Access Control) address of the access point radio</td>
+
         <td>The MAC (Media Access Control) address of the access point radio.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Signal Quality</td>
 
         <td>Signal Quality</td>
−
         <td>The signal quality between router's radio and some other device that is connected to the router</td>
+
         <td>The signal quality between router's radio and some other device that is connected to the router.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Bit rate</td>
 
         <td>Bit rate</td>
−
         <td>The maximum possible physical throughput that the router's radio can handle. Bit rate will be shared between router and other possible devices which connect to local Access Point (AP) </td>
+
         <td>The maximum possible physical throughput that the router's radio can handle. Bit rate will be shared between router and other possible devices which connect to local Access Point (AP) .</td>
 
     </tr>
 
     </tr>
   Line 221: Line 97:  
<table class="nd-othertables">
 
<table class="nd-othertables">
 
     <tr>
 
     <tr>
−
         <th width=250>Field name</th>
+
         <th width="250">Field name</th>
−
         <th width=900>Description</th>
+
         <th width="900">Description</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>MAC address</td>
 
         <td>MAC address</td>
−
         <td>Associated station's MAC (Media Access Control) address</td>
+
         <td>Associated station's MAC (Media Access Control) address.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Device Name</td>
 
         <td>Device Name</td>
−
         <td>Currently connected device name</td>
+
         <td>Currently connected device name.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Signal</td>
 
         <td>Signal</td>
−
         <td>Received Signal Strength Indicator (RSSI). Signal's strength measured in dBm</td>
+
         <td>Received Signal Strength Indicator (RSSI). Signal's strength measured in dBm.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>RX rate</td>
 
         <td>RX rate</td>
−
         <td>The rate at which packets are received from associated station</td>
+
         <td>The rate at which packets are received from associated station.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>TX rate</td>
 
         <td>TX rate</td>
−
         <td>The rate at which packets are sent to associated station</td>
+
         <td>The rate at which packets are sent to associated station.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
 +
==OpenVPN==
   −
<!--==OpenVPN==
+
The OpenVPN section displays information about the OpenVPN connection (either client or server).
−
 
  −
The OpenVPN section displays information about the OpenVPN connection (either client or server)
  −
 
  −
 
  −
[[Image:Status network openvpn.PNG]]
      +
[[Image:Status network openvpn.PNG|border|class=tlt-border]]
 +
<table class="nd-othertables">
 +
    <tr>
 +
        <th width="250">Field name</th>
 +
        <th width="900">Description</th>
 +
    </tr>
 +
    <tr>
 +
        <td>Enabled</td>
 +
        <td>Indicates whether OpenVPN server/client is enabled or not.
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
        <td>Status</td>
 +
        <td>Shows connection status.
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
        <td>Type</td>
 +
        <td>Shows whether the router is a server or client.
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
        <td>IP</td>
 +
        <td>Router's OpenVPN IP address.
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
        <td>Mask</td>
 +
        <td> A [[What is a Netmask?|netmask]] is used to define how "large" a network is by specifying which part of the
 +
            IP address denotes the network and which part denotes the device.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Time</td>
 +
        <td>Shows OpenVPN connection uptime.
 +
        </td>
 +
    </tr>
 +
</table>
    
==VRRP==
 
==VRRP==
Line 258: Line 167:  
The VRRP section displays VRRP status information.
 
The VRRP section displays VRRP status information.
   −
 
+
[[Image:Status network vrrp.PNG|border|class=tlt-border]]
−
[[Image:Status network vrrp.PNG]]
+
<table class="nd-othertables">
−
 
+
    <tr>
−
 
+
        <th width="250">Field name</th>
−
==Topology==
+
        <th width="900">Description</th>
−
 
+
    </tr>
−
The Topology section is a visual representation of your LAN network
+
    <tr>
−
 
+
        <td>Status</td>
−
 
+
        <td>Shows whether VRRP is enabled or not.
−
[[Image:Status network topology.PNG]]
+
        </td>
−
 
+
    </tr>
−
 
+
    <tr>
 +
        <td>Virtual IP</td>
 +
        <td>Virtual IP address for LAN's VRRP cluster.
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
        <td>Priority</td>
 +
        <td>Indicates router's priority.
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
        <td>Router</td>
 +
        <td>Shows whether the router is Master or Backup.</td>
 +
    </tr>
 +
</table>
 
==Access==
 
==Access==
    
===Access Information===
 
===Access Information===
 
----
 
----
−
The Access Information section displays the status of both local and remote SSH, HTTP and HTTPS access and shows the number of current connections to your router through each of these protocol
+
The Access Information section displays the status of both local and remote SSH, HTTP and HTTPS access and shows the number of current connections to your router through each of those protocol.
−
 
  −
 
  −
[[Image:Status network access info.PNG]]
      +
[[Image:Status network access info.PNG|border|class=tlt-border]]
 +
<table class="nd-othertables">
 +
    <tr>
 +
        <th width="250">Field name</th>
 +
        <th width="900">Description</th>
 +
    </tr>
 +
    <tr>
 +
        <td>Type</td>
 +
        <td>Shows access type.
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
        <td>Status</td>
 +
        <td>Indicates whether that access type is enabled or not.
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
        <td>Port</td>
 +
        <td>Shows which port which type of access uses.
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
        <td>Active connections</td>
 +
        <td>Currently active connections count and data usage.</td>
 +
    </tr>
 +
</table>
    
===Last Connections===
 
===Last Connections===
 
----
 
----
−
The Last Connections section displays three of the last local and remote connections to your router via SSH, HTTP and HTTPS and their status (either failed or successful)
+
The Last Connections section displays three of the last local and remote connections to your router via SSH, HTTP and HTTPS and their status (either failed or successful).
−
 
  −
 
  −
[[Image:Status network access last.PNG]]
  −
 
      +
[[Image:Status network access last.PNG|border|class=tlt-border]]
 +
<table class="nd-othertables">
 +
    <tr>
 +
        <th width="250">Field name</th>
 +
        <th width="900">Description</th>
 +
    </tr>
 +
    <tr>
 +
        <td>Type</td>
 +
        <td>Shows access type.
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
        <td>Date</td>
 +
        <td>Indicates connection date.
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
        <td>IP</td>
 +
        <td>Shows what IP address connected.
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
        <td>Authentication Status</td>
 +
        <td>Shows whether authentication was successful or not.</td>
 +
    </tr>
 +
</table>
   −
-->
+
[[Category:{{{name}}} Status section]]
−
[[Category:{{{name}}} WebUI]]
 
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/52620...84008"

Navigation menu