Template:Networking rut2xx manual network

From Teltonika Networks Wiki
Revision as of 13:06, 19 August 2021 by Gytispieze (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

The information in this page is updated in accordance with firmware version RUT2XX_R_00.01.14.3.

Summary

The Network page contains information related to the device's networking features. This chapter is an overview of the Network page in {{{name}}} devices.

{{Template:Networking_rutxxx_manual_network_mobile_{{{mobile}}} | name = {{{name}}} | file_mobile = Networking_rutxxx_manual_network_mobile_information_3g_v2.png }}

{{Template:Networking_{{{series}}}_manual_network_wan | name = {{{name}}} | file_wan = Networking_rut2xx_manual_network_wan_information_v1.png }}

LAN

The LAN section displays information about your Local Area Network and active DHCP leases.

LAN Information


The LAN Information section contains data on the router's LAN interface(s). The figure below is an example of the LAN Information section:

Networking rutxxx manual network lan lan information v1.png

Field Description
Name LAN interface name
IP address Router's LAN IP address
Netmask A netmask is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes the device
Ethernet MAC address Router's LAN MAC address
Connected for LAN interface uptime

DHCP Leases


The DHCP Leases section contains information on DHCP clients that hold active DHCP lease. The figure below is an example of the DHCP Leases section:

Networking rutxxx manual network lan dhcp leases v1.png

Field Description
Hostname DHCP client's hostname.
IP address DHCP client's IP address.
LAN name LAN interface name through which the client is connected to the router.
MAC address DHCP client's MAC address.
Lease time remaining Remaining lease time for a DHCP client. Active DHCP lease holders will try to renew their DHCP leases after a half of the lease time passes. DHCP lease settings can be changed in the Network → LAN → [[{{{name}}} LAN#General|DHCP Server]] section.

Ports


The Ports displays an image of the router's front panel with highlighted Ethernet ports that are currently in use. The Refresh button refreshes all information fields in the page. The figure below is an example of the Ports section:

Networking rut2xx manual network lan ports v1.png

Wireless

The Wireless section displays information about wireless connections and associated WiFi stations.

Wireless Information

The figure below is an example of the Wireless Information section:

Networking rut2 manual network wireless information.png

Field name Description
Channel Currently used channel. In most countries there are 13 WiFi channels on the 2.4 GHz band (14 in Japan) to choose from
Country Code Indicates currently used country code (SO/IEC 3166 alpha2 country codes as defined in ISO 3166-1 standard)

Wireless Status


The Wireless Status section contains information about Wireless Access Points. The figure below is an example of the Wireless Status section:

Networking rut2 manual network wireless status.png

Field name Description
SSID The broadcasted SSID (Service Set Identifier) of the wireless network.
Mode Connection mode. Can either be Access Point (AP) or Client. In AP mode others can connect to this router's wireless connection. In client mode router connects to other wireless networks.
Encryption The type of WiFi encryption used.
Wireless MAC The MAC (Media Access Control) address of the access point radio.
Signal Quality The signal quality between router's radio and some other device that is connected to the router.
Bit rate The maximum possible physical throughput that the router's radio can handle. Bit rate will be shared between router and other possible devices which connect to local Access Point (AP) .

Associated Stations


The Associated Stations section contains information about devices that are connected to Wireless Access Point. The figure below is an example of the Associated Stations section:

Networking rut2 manual network wireless associated.png

Field name Description
MAC address Associated station's MAC (Media Access Control) address.
Device Name Currently connected device name.
Signal Received Signal Strength Indicator (RSSI). Signal's strength measured in dBm.
RX rate The rate at which packets are received from associated station.
TX rate The rate at which packets are sent to associated station.

OpenVPN

The OpenVPN section displays information about the OpenVPN connection (either client or server).

Status network openvpn.PNG

Field name Description
Enabled Indicates whether OpenVPN server/client is enabled or not.
Status Shows connection status.
Type Shows whether the router is a server or client.
IP Router's OpenVPN IP address.
Mask A netmask is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes the device.
Time Shows OpenVPN connection uptime.

VRRP

The VRRP section displays VRRP status information.

Status network vrrp.PNG

Field name Description
Status Shows whether VRRP is enabled or not.
Virtual IP Virtual IP address for LAN's VRRP cluster.
Priority Indicates router's priority.
Router Shows whether the router is Master or Backup.

Access

Access Information


The Access Information section displays the status of both local and remote SSH, HTTP and HTTPS access and shows the number of current connections to your router through each of those protocol.

Status network access info.PNG

Field name Description
Type Shows access type.
Status Indicates whether that access type is enabled or not.
Port Shows which port which type of access uses.
Active connections Currently active connections count and data usage.

Last Connections


The Last Connections section displays three of the last local and remote connections to your router via SSH, HTTP and HTTPS and their status (either failed or successful).

Status network access last.PNG

Field name Description
Type Shows access type.
Date Indicates connection date.
IP Shows what IP address connected.
Authentication Status Shows whether authentication was successful or not.

[[Category:{{{name}}} Status section]]