Template:Networking rut30x manual input output status
From Teltonika Networks Wiki
Revision as of 12:24, 14 December 2020 by LorurnA (talk | contribs) (Created page with "<pre> ioman.gpio.dio0 ioman.gpio.dio1 </pre> Call command <b>ubus call <i>value</i> status</b>: root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.dio0 status { "v...")
ioman.gpio.dio0 ioman.gpio.dio1
Call command ubus call value status:
root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.dio0 status { "value": "0", "direction": "in", "bi_dir": false, "invert_input": false }
- din1 is the input:
- "value": "0" means low level state.
- "value": "1" means high level state.
- dout1 is the output:
- "value": "0" means low level state.
- "value": "1" means high level state.