Difference between revisions of "Template:Networking rut9 manual input output status"
From Teltonika Networks Wiki
(Created page with " ioman.gpio.din1 - 4PIN input ioman.gpio.din2 - Digital input (only for passive sensors) ioman.gpio.dout1 - 4PIN output ioman.gpio.dout2 - Galvanically isolated o...") |
|||
| Line 1: | Line 1: | ||
ioman.gpio.din1 - 4PIN input | ioman.gpio.din1 - 4PIN input | ||
| + | ioman.gpio.dout1 - 4PIN output | ||
ioman.gpio.din2 - Digital input (only for passive sensors) | ioman.gpio.din2 - Digital input (only for passive sensors) | ||
| − | |||
ioman.gpio.dout2 - Galvanically isolated open collector output | ioman.gpio.dout2 - Galvanically isolated open collector output | ||
ioman.relay.relay0 - Digital relay output | ioman.relay.relay0 - Digital relay output | ||
Revision as of 14:42, 21 June 2021
ioman.gpio.din1 - 4PIN input ioman.gpio.dout1 - 4PIN output ioman.gpio.din2 - Digital input (only for passive sensors) ioman.gpio.dout2 - Galvanically isolated open collector output ioman.relay.relay0 - Digital relay output ioman.gpio.iio - Digital galvanically isolated input ioman.adc.adc0 - Analog input ioman.acl.acl0 - Analog Current loop
Call command ubus call value status :
root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.din1 status
{
"value": "0",
"direction": "in",
"bi_dir": false,
"invert_input": false
}
- din1 is the input:
- "value": "0" means low level state.
- "value": "1" means high level state.
- dout1 is the output:
- "value": "0" means low level state.
- "value": "1" means high level state.
