Difference between revisions of "Template:Networking rut9 manual input output status"

From Teltonika Networks Wiki
Line 1: Line 1:
<pre>
+
<pre>
ioman.gpio.din1    - 4PIN input
+
ioman.gpio.din1    - 4PIN input
ioman.gpio.dout1  - 4PIN output
+
ioman.gpio.dout1  - 4PIN output
ioman.gpio.din2    - Digital input (only for passive sensors)
+
ioman.gpio.din2    - Digital input (only for passive sensors)
ioman.gpio.dout2  - Galvanically isolated open collector output
+
ioman.gpio.dout2  - Galvanically isolated open collector output
ioman.relay.relay0 - Digital relay output
+
ioman.relay.relay0 - Digital relay output
ioman.gpio.iio    - Digital galvanically isolated input  
+
ioman.gpio.iio    - Digital galvanically isolated input  
ioman.adc.adc0    - Analog input
+
ioman.adc.adc0    - Analog input
ioman.acl.acl0    - Analog Current loop
+
ioman.acl.acl0    - Analog Current loop
 +
</pre>
  
 
Call command <b>ubus call <u>value</u> status </b>:
 
Call command <b>ubus call <u>value</u> status </b>:

Revision as of 14:49, 18 August 2021

ioman.gpio.din1    - 4PIN input
ioman.gpio.dout1   - 4PIN output
ioman.gpio.din2    - Digital input (only for passive sensors)
ioman.gpio.dout2   - Galvanically isolated open collector output
ioman.relay.relay0 - Digital relay output
ioman.gpio.iio     - Digital galvanically isolated input 
ioman.adc.adc0     - Analog input
ioman.acl.acl0     - Analog Current loop

Call command ubus call value status :

root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.din1 status
{
        "value": "0",
        "direction": "in",
        "bi_dir": false,
        "invert_input": false
}
  • din1 is the input:
    • "value": "0" means low level state.
    • "value": "1" means high level state.
  • dout1 is the output:
    • "value": "0" means low level state.
    • "value": "1" means high level state.