Difference between revisions of "Template:Networking rut9 manual input output status"

From Teltonika Networks Wiki
(Created page with " ioman.gpio.din1 - 4PIN input ioman.gpio.din2 - Digital input (only for passive sensors) ioman.gpio.dout1 - 4PIN output ioman.gpio.dout2 - Galvanically isolated o...")
 
Line 1: Line 1:
 
  ioman.gpio.din1    - 4PIN input
 
  ioman.gpio.din1    - 4PIN input
 +
ioman.gpio.dout1  - 4PIN output
 
  ioman.gpio.din2    - Digital input (only for passive sensors)
 
  ioman.gpio.din2    - Digital input (only for passive sensors)
ioman.gpio.dout1  - 4PIN output
 
 
  ioman.gpio.dout2  - Galvanically isolated open collector output
 
  ioman.gpio.dout2  - Galvanically isolated open collector output
 
  ioman.relay.relay0 - Digital relay output
 
  ioman.relay.relay0 - Digital relay output

Revision as of 13:42, 21 June 2021

ioman.gpio.din1    - 4PIN input
ioman.gpio.dout1   - 4PIN output
ioman.gpio.din2    - Digital input (only for passive sensors)
ioman.gpio.dout2   - Galvanically isolated open collector output
ioman.relay.relay0 - Digital relay output
ioman.gpio.iio     - Digital galvanically isolated input 
ioman.adc.adc0     - Analog input
ioman.acl.acl0     - Analog Current loop

Call command ubus call value status :

root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.din1 status
{
        "value": "0",
        "direction": "in",
        "bi_dir": false,
        "invert_input": false
}
  • din1 is the input:
    • "value": "0" means low level state.
    • "value": "1" means high level state.
  • dout1 is the output:
    • "value": "0" means low level state.
    • "value": "1" means high level state.