Changes

The <b>IPsec configuration</b> section is used to configure the main parameters of an IPsec connection. Refer to the figure and table below for information on the configuration fields located in the general settings section.

The <b>IPsec configuration</b> section is used to configure the main parameters of an IPsec connection. Refer to the figure and table below for information on the configuration fields located in the general settings section.

[[File:{{{file_ipsec_config}}}]]

[[File:Networking_rutxxx_vpn_ipsec_ipsec_configuration_v3.png|border|class=tlt-border]]

<table class="nd-mantable">

<table class="nd-mantable">

===Pre-shared keys===

===Pre-shared keys===

----

----

A <b>pre-shared key</b> is a secret password used for authentication between IPsec peers before a secure tunnel is established. To create a new key, click the 'Add' button.

A <b>pre-shared key</b> is a secret password used for authentication between IPsec peers  

before a secure tunnel is established. During authentication device will try to check if

connection matches any <b>Secret's ID selector</b> and then the <b>pre-shared key</b> from

the first match will be used.  

The figure below is an example of the Pre-shared keys section and the table below provides information on configuration fields contained in that section:

 

The figure below is an example of the Pre-shared keys section and the table  

below provides information on configuration fields contained in that section:

[[File:{{{file_ipsec_psk}}}]]

[[File:{{{file_ipsec_psk}}}]]