0
edits
Changes
Template:Networking rut configuration example nordvpn use case (view source)
Revision as of 17:47, 27 April 2020
, 17:47, 27 April 2020→RUT9xx configuration
==RUT9xx configuration==
==RUT9xx configuration==
<table class="nd-othertables_2">
<tr>
<th width=525; style="border-bottom: 1px solid white;></th>
<th width=620; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking_rut_configuration_example_nordvpn_1_v1.png|border|class=tlt-border|550px|right]]</th>
</tr>
<tr>
<td style="border-bottom: 1px solid white>
Access RUT9xx WebUI and go to '''Services > VPN > OpenVPN'''. There create a new configuration by selecting role '''Client''', writing '''New configuration name''' and pressing '''Add New''' button. It should appear after a few seconds. Then press '''Edit'''.
Access RUT9xx WebUI and go to '''Services > VPN > OpenVPN'''. There create a new configuration by selecting role '''Client''', writing '''New configuration name''' and pressing '''Add New''' button. It should appear after a few seconds. Then press '''Edit'''.
</td>
</tr>
</table>
----
<table class="nd-othertables_2">
<tr>
[[File:Networking_rut_configuration_example_nordvpn_2_v1.png|border|class=tlt-border]]
<th width=525; style="border-bottom: 1px solid white;></th>
<th width=620; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking_rut_configuration_example_nordvpn_2_v1.png|border|class=tlt-border|550px|right]]</th>
</tr>
<tr>
<td style="border-bottom: 1px solid white>
Now apply the following configuration:
# '''Enable OpenVPN config from file''' feature.
# '''Enable OpenVPN config from file''' feature.
# Write NordVPN account '''Password'''.
# Write NordVPN account '''Password'''.
# Press '''Save'''.
# Press '''Save'''.
</td>
</tr>
</table>
----
<table class="nd-othertables_2">
<tr>
<th width=525; style="border-bottom: 1px solid white;></th>
<th width=620; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking_rut_configuration_example_expressvpn_2_v1.png|border|class=tlt-border|550px|right]]</th>
</tr>
<tr>
<td style="border-bottom: 1px solid white>
You will be forwarded back to '''OpenVPN configuration''' window.
You will be forwarded back to '''OpenVPN configuration''' window.
You can check whether you applied the configuration correctly. Go to '''Status > Network > OpenVPN''' it should indicate as '''Connected'''. (It might not connect instantly so please wait for a moment).
You can check whether you applied the configuration correctly. Go to '''Status > Network > OpenVPN''' it should indicate as '''Connected'''. (It might not connect instantly so please wait for a moment).
</td>
</tr>
</table>
----
<table class="nd-othertables_2">
<tr>
<th width=525; style="border-bottom: 1px solid white;></th>
<th width=620; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking_rut_configuration_example_nordvpn_4_v1.png|border|class=tlt-border|550px|right]]</th>
</tr>
<tr>
<td style="border-bottom: 1px solid white>
Now you need to configure your router to use NordVPN DNS servers. In order to do that go to '''Network > WAN''', there click '''Edit''' on a WAN source you are using (in this example we used mobile WAN source).
Now you need to configure your router to use NordVPN DNS servers. In order to do that go to '''Network > WAN''', there click '''Edit''' on a WAN source you are using (in this example we used mobile WAN source).
</td>
</tr>
</table>
----
[[File:Networking_rut_configuration_example_nordvpn_5_v1.png|border|class=tlt-border]]
<table class="nd-othertables_2">
<tr>
<th width=525; style="border-bottom: 1px solid white;></th>
<th width=620; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking_rut_configuration_example_nordvpn_5_v1.png|border|class=tlt-border|550px|right]]</th>
</tr>
<tr>
<td style="border-bottom: 1px solid white>
Now to set DNS servers follow the steps below:
# Disable '''DNS servers advertised by peer'''.
# Disable '''DNS servers advertised by peer'''.
# Add second DNS server: '''103.86.99.100'''.
# Add second DNS server: '''103.86.99.100'''.
# Press '''Save & Apply'''.
# Press '''Save & Apply'''.
</td>
</tr>
</table>
==Testing configuration==
==Testing configuration==
