Difference between revisions of "Template:Networking rut manual graphs"

From Teltonika Networks Wiki
(Created page with "==Summary== The <b>Graphs</b> section contains various graphs that display various statistical data changes in real time. This chapter is an overview of the Graphs section in...")
 
Line 5: Line 5:
 
==Mobile Signal==
 
==Mobile Signal==
  
−
{{Template: webui_status_graphs_mobile_signal_strength_graph}}
+
The <b>Mobile Signal Strength</b> graph displays mobile signal strength ([[RSSI]], measured in dBm) value changes over a period of 3 minutes. The figure below is an example of the Mobile Signal Strength graph:
  
−
[[File:Rutxxx webui status graphs mobile signal mobile signal strength v1.png]]
+
[[File:{{{file_mobile_signal}}}]]
  
 
==Load==
 
==Load==
  
−
{{Template: webui_status_graphs_realtime_load_graph}}
+
The <b>Realtime Load</b> section displays a tri-graph that illustrates average CPU load values in real time. The graph consists out of three color coded graphs, each one corresponding to the average CPU load over 1 (red), 5 (orange) and 15 (yellow) most recent minutes.
  
−
[[File:Rutxxx webui status graphs load realtime load v1.png]]
+
The figure below is an example of the Realtime Load graph:
 +
 
 +
[[File:{{{file_load}}}]]
  
 
==Traffic==
 
==Traffic==
  
−
{{Template: webui_status_graphs_realtime_traffic_graph}}
+
The <b>Realtime Traffic</b> graphs provide users with the possibility to monitor average inbound and outbound traffic over the course of 3 minutes; each new measurement is taken every 3 seconds. The graphs consist out of two color coded graphs: the green graph shows the outbound traffic, the blue graph shows the inbound traffic. Although not graphed, the page also displays peak loads and averages of inbound and outbound traffic. Bridge
 +
 
 +
The figure below is an example of the Realtime traffic graph for the Bridge connection:
  
−
[[File:Rutxxx webui status graphs traffic realtime traffic v1.png]]
+
[[File:{{{file_traffic}}}]]
  
−
{{Template: webui_status_graphs_realtime_traffic_graph_table}}
+
<table class="nd-othertables">
 +
    <tr>
 +
        <th style="width: 300px">GRAPH</th>
 +
      <th style="width: 779px">DESCRIPTION</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Bridge</td>
 +
      <td>Cumulative graph, which encompasses wired Ethernet LAN and the wireless network</td>
 +
    </tr>
 +
    <tr>
 +
      <td>LAN</td>
 +
      <td>Displays traffic that passes through the LAN network interface(s) in graph form</td>
 +
    </tr>
 +
    <tr>
 +
    <td>WiFi</td>
 +
        <td>Displays traffic that passes through the WiFi interface in graph form</td>
 +
    </tr>
 +
    <tr>
 +
    <td>WAN (Wired) {{!}} WAN (WiFi) {{!}} Mobile</td>
 +
        <td>Displays traffic that passes through the current active WAN connection in graph form</td>
 +
    </tr>
 +
</table>
  
 
==Wireless==
 
==Wireless==
  
−
{{Template: webui_status_graphs_realtime_wireless_graph}}
+
The <b>Realtime Wireless</b> graph displays the wireless radio signal strength, signal noise, average and peak signal levels and the theoretical maximum channel permeability. The graph below the WiFi signal graph displays the Phy Rate for the wireless connection.
 +
 
 +
The figures below are examples of both Wireless graphs:
  
−
[[File:Rutxxx webui status graphs wireless realtime wireless signal v1.png]]
+
[[File:{{{file_wireless_signal}}}]]
  
−
[[File:Rutxxx webui status graphs wireless realtime wireless phy rate v1.png]]
+
[[File:{{{file_wireless_phy_rate}}}]]
  
 
==Connections==
 
==Connections==
  
−
{{Template: webui_status_graphs_connections_realtime_connections_graph}}
+
The <b>Realtime Connections</b> graph displays currently active network connections with the information about network, protocol, source and destination addresses and transfer speed. The table the graph displays basic information on active connections
 +
 
 +
The figures below are examples of both of the Realtime Connections graph and the corresponding table:
  
−
[[File:Rutxxx webui status graphs connections realtime connections graph v1.png]]
+
[[File:{{{file_realtime_con_graph}}}]]
  
−
[[File:Rutxxx webui status graphs connections realtime connections list v1.png]]
+
[[File:{{{file_realtime_con_list}}}]]
  
 
[[Category:{{{name}}} WebUI]]
 
[[Category:{{{name}}} WebUI]]

Revision as of 16:04, 8 March 2019

Summary

The Graphs section contains various graphs that display various statistical data changes in real time. This chapter is an overview of the Graphs section in {{{name}}} routers.

Mobile Signal

The Mobile Signal Strength graph displays mobile signal strength (RSSI, measured in dBm) value changes over a period of 3 minutes. The figure below is an example of the Mobile Signal Strength graph:

[[File:{{{file_mobile_signal}}}]]

Load

The Realtime Load section displays a tri-graph that illustrates average CPU load values in real time. The graph consists out of three color coded graphs, each one corresponding to the average CPU load over 1 (red), 5 (orange) and 15 (yellow) most recent minutes.

The figure below is an example of the Realtime Load graph:

[[File:{{{file_load}}}]]

Traffic

The Realtime Traffic graphs provide users with the possibility to monitor average inbound and outbound traffic over the course of 3 minutes; each new measurement is taken every 3 seconds. The graphs consist out of two color coded graphs: the green graph shows the outbound traffic, the blue graph shows the inbound traffic. Although not graphed, the page also displays peak loads and averages of inbound and outbound traffic. Bridge

The figure below is an example of the Realtime traffic graph for the Bridge connection:

[[File:{{{file_traffic}}}]]

GRAPH DESCRIPTION
Bridge Cumulative graph, which encompasses wired Ethernet LAN and the wireless network
LAN Displays traffic that passes through the LAN network interface(s) in graph form
WiFi Displays traffic that passes through the WiFi interface in graph form
WAN (Wired) | WAN (WiFi) | Mobile Displays traffic that passes through the current active WAN connection in graph form

Wireless

The Realtime Wireless graph displays the wireless radio signal strength, signal noise, average and peak signal levels and the theoretical maximum channel permeability. The graph below the WiFi signal graph displays the Phy Rate for the wireless connection.

The figures below are examples of both Wireless graphs:

[[File:{{{file_wireless_signal}}}]]

[[File:{{{file_wireless_phy_rate}}}]]

Connections

The Realtime Connections graph displays currently active network connections with the information about network, protocol, source and destination addresses and transfer speed. The table the graph displays basic information on active connections

The figures below are examples of both of the Realtime Connections graph and the corresponding table:

[[File:{{{file_realtime_con_graph}}}]]

[[File:{{{file_realtime_con_list}}}]]

[[Category:{{{name}}} WebUI]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rut_manual_graphs&oldid=30414"