Changes

no edit summary
Line 1: Line 1:  +
{{Template: Networking_rutos_manual_fw_disclosure
 +
| fw_version = {{#switch: {{{series}}}
 +
  | RUT2XX = {{{series}}}_R_00.01.14.3
 +
  | RUT9XX = {{{series}}}_R_00.06.08.2}}
 +
| series    = {{{series}}}
 +
}}
 +
__TOC__
 
==Summary==
 
==Summary==
   −
Load balancing lets users create rules that divide traffic between different interfaces. This chapter is an Overview of the Load Balancing function in RUT routers.
+
<b>Load Balancing</b> provides the possibility create policies and rules that divide traffic between different interfaces.
 +
 
 +
This chapter of the user manual provides an overview of the Load Balancing page for {{{name}}} devices.
    
==Policies==
 
==Policies==
   −
The '''Policies''' section contains Load Balancing rules. One default rule named '''Balanced''' is already in place. You can edit this default rule or create a new custom rule.  
+
The '''Policies''' section contains Load Balancing policies. One default policy named '''Balanced''' is already in place. You can edit this default policy or create a new custom policy.  
    +
[[Image:Network load balancing policies v1.PNG|border|class=tlt-border]]
   −
[[Image:Network load balancing policies.PNG]]
+
To configure a Policy, click the '''Edit''' button located next to it, after which you will be redirected to the Configuration window.
    +
[[Image:Network load balancing policies configuration v1.PNG|border|class=tlt-border]]
   −
To configure a Policy, click the '''Edit''' button located next to it, after which you will be redirected to the Configuration window.
+
As you can see from the image above, the configuration is very simple. You can assign
 +
ratio values to WAN interfaces. The ratio values represent a percentage of load that
 +
will go through an interface. For example, in the default configuration 3 parts of
 +
traffic will go through the Mobile interface and 2 parts will go through the Wired
 +
interface, which means roughly 60% (3/5) of data will be transferred through Mobile,
 +
40% (2/5) through Wired. If the ratios would be different, say Mobile: 5, Wired: 10, then
 +
33% (5/15) of data would be transferred through Mobile, and 66% (10/15) would go through Wired.
 +
 
 +
==Rules==
 +
 
 +
The '''Rules''' section contains Load Balancing rules. One default rule named
 +
'''default_rule''' is already in place. You can edit this default rule or create a new custom rule.
    +
[[Image:Network load balancing rules.PNG|border|class=tlt-border]]
   −
[[Image:Network load balancing policies configuration.PNG]]
+
To configure a rule, click the '''Edit''' button located next to it, after which you will be redirected to the Configuration window.
    +
[[Image:Network load balancing rules configuration v1.PNG|border|class=tlt-border]]
   −
As you can see from the image above, the configuration is very simple. You can assign ratio values to WAN interfaces. The ratio values represent a percentage of load that will go through an interface. For example, in the default configuration 3 parts of traffic will go through the Mobile interface and 2 parts will go through the Wired interface, which means roughly 60% (3/5) of data will be transferred through Mobile, 40% (2/5) through Wired. If the ratios would be different, say Mobile: 5, Wired: 10, then 33% (5/15) of data would be transferred through Mobile, and 66% (10/15) would go through Wired.
+
<table class="nd-mantable">
 +
    <tr>
 +
        <th>field name</th>
 +
      <th>value</th>
 +
      <th>description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Source address</td>
 +
      <td>ip; Default: '''none'''</td>
 +
      <td>Source IP address. Can be specified in CIDR notation (eg "192.168.1.0/24" without quotes).</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Source port</td>
 +
      <td>number; Default: '''none'''</td>
 +
      <td>Source port number. May be entered as a single or multiple ports (eg "21" or "80,443" without quotes).</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Destination address</td>
 +
        <td>ip; Default: '''0.0.0.0/0'''</td>
 +
        <td>Destination IP address. Can be specified in CIDR notation (eg "192.168.1.0/24" without quotes).</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Destination port</td>
 +
        <td>number; Default: '''none'''</td>
 +
        <td>Destination port number. May be entered as a single or multiple ports (eg "21" or "80,443" without quotes).</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Protocol</td>
 +
        <td>all | ip | #hopopt | icmp | igmp | ggp | ipencap | st | tcp | egp | igp | pup | udp | hmp | xns | rdp | iso | xtp | ddp | idpr | ipv6 | ipv6 | ipv6 | idrp | rsvp | gre | esp | ah | skip | ipv6 | ipv6 | ipv6 | rspf | vmtp | eigrp | ospf | ax | ipip | etherip | encap | pim | ipcomp | vrrp | l2tp | isis | sctp | fc; Default: '''all'''</td>
 +
        <td>Which protocol to use.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Policy assigned</td>
 +
        <td>policies; Default: '''balanced'''</td>
 +
        <td>Policy to use for this rule.</td>
 +
    </tr>
 +
</table>
   −
[[Category:{{{name}}} WebUI]]
+
[[Category:{{{name}}} Network section]]

Navigation menu