Difference between revisions of "Template:Networking rut manual load balancing"

From Teltonika Networks Wiki
m (add borders)
(add rules section)
Line 1: Line 1:
 
==Summary==
 
==Summary==
  
−
Load balancing lets users create rules that divide traffic between different interfaces. This chapter is an Overview of the Load Balancing function in RUT routers.
+
Load balancing lets users create policies and rules that divide traffic between different interfaces. This chapter is an Overview of the Load Balancing function in RUT routers.
  
 
==Policies==
 
==Policies==
  
−
The '''Policies''' section contains Load Balancing rules. One default rule named '''Balanced''' is already in place. You can edit this default rule or create a new custom rule.  
+
The '''Policies''' section contains Load Balancing policies. One default policy named '''Balanced''' is already in place. You can edit this default policy or create a new custom policy.  
  
 +
[[Image:Network load balancing policies v1.PNG|border|class=tlt-border]]
  
−
[[Image:Network load balancing policies.PNG|border|class=tlt-border]]
+
To configure a Policy, click the '''Edit''' button located next to it, after which you will be redirected to the Configuration window.
 +
 
 +
[[Image:Network load balancing policies configuration v1.PNG|border|class=tlt-border]]
 +
 
 +
As you can see from the image above, the configuration is very simple. You can assign ratio values to WAN interfaces. The ratio values represent a percentage of load that will go through an interface. For example, in the default configuration 3 parts of traffic will go through the Mobile interface and 2 parts will go through the Wired interface, which means roughly 60% (3/5) of data will be transferred through Mobile, 40% (2/5) through Wired. If the ratios would be different, say Mobile: 5, Wired: 10, then 33% (5/15) of data would be transferred through Mobile, and 66% (10/15) would go through Wired.
  
 +
==Rules==
  
−
To configure a Policy, click the '''Edit''' button located next to it, after which you will be redirected to the Configuration window.
+
The '''Rules''' section contains Load Balancing rules. One default rule named '''default_rule''' is already in place. You can edit this default rule or create a new custom rule.
  
 +
[[Image:Network load balancing rules.PNG|border|class=tlt-border]]
  
−
[[Image:Network load balancing policies configuration.PNG|border|class=tlt-border]]
+
To configure a rule, click the '''Edit''' button located next to it, after which you will be redirected to the Configuration window.
  
 +
[[Image:Network load balancing rules configuration v1.PNG|border|class=tlt-border]]
  
−
As you can see from the image above, the configuration is very simple. You can assign ratio values to WAN interfaces. The ratio values represent a percentage of load that will go through an interface. For example, in the default configuration 3 parts of traffic will go through the Mobile interface and 2 parts will go through the Wired interface, which means roughly 60% (3/5) of data will be transferred through Mobile, 40% (2/5) through Wired. If the ratios would be different, say Mobile: 5, Wired: 10, then 33% (5/15) of data would be transferred through Mobile, and 66% (10/15) would go through Wired.
+
<table class="nd-mantable">
 +
    <tr>
 +
        <th>field name</th>
 +
      <th>value</th>
 +
      <th>description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Source address</td>
 +
      <td>ip; Default: '''none'''</td>
 +
      <td>Source IP address. Can be specified in CIDR notation (eg "192.168.1.0/24" without quotes).</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Source port</td>
 +
      <td>number; Default: '''none'''</td>
 +
      <td>Source port number. May be entered as a single or multiple ports (eg "21" or "80,443" without quotes).</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Destination address</td>
 +
        <td>ip; Default: '''none'''</td>
 +
        <td>Destination IP address. Can be specified in CIDR notation (eg "192.168.1.0/24" without quotes).</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Destination port</td>
 +
        <td>number; Default: '''none'''</td>
 +
        <td>Destination port number. May be entered as a single or multiple ports (eg "21" or "80,443" without quotes).</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Protocol</td>
 +
        <td>all | ip | #hopopt | icmp | igmp | ggp | ipencap | st | tcp | egp | igp | pup | udp | hmp | xns | rdp | iso | xtp | ddp | idpr | ipv6 | ipv6 | ipv6 | idrp | rsvp | gre | esp | ah | skip | ipv6 | ipv6 | ipv6 | rspf | vmtp | eigrp | ospf | ax | ipip | etherip | encap | pim | ipcomp | vrrp | l2tp | isis | sctp | fc; Default: '''all'''</td>
 +
        <td>Which protocol to use.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Policy assigned</td>
 +
        <td>policies; Default: '''balanced'''</td>
 +
        <td>Policy to use for this rule.</td>
 +
    </tr>
 +
</table>
  
 
[[Category:{{{name}}} WebUI]]
 
[[Category:{{{name}}} WebUI]]

Revision as of 09:52, 3 March 2020

Summary

Load balancing lets users create policies and rules that divide traffic between different interfaces. This chapter is an Overview of the Load Balancing function in RUT routers.

Policies

The Policies section contains Load Balancing policies. One default policy named Balanced is already in place. You can edit this default policy or create a new custom policy.

Network load balancing policies v1.PNG

To configure a Policy, click the Edit button located next to it, after which you will be redirected to the Configuration window.

Network load balancing policies configuration v1.PNG

As you can see from the image above, the configuration is very simple. You can assign ratio values to WAN interfaces. The ratio values represent a percentage of load that will go through an interface. For example, in the default configuration 3 parts of traffic will go through the Mobile interface and 2 parts will go through the Wired interface, which means roughly 60% (3/5) of data will be transferred through Mobile, 40% (2/5) through Wired. If the ratios would be different, say Mobile: 5, Wired: 10, then 33% (5/15) of data would be transferred through Mobile, and 66% (10/15) would go through Wired.

Rules

The Rules section contains Load Balancing rules. One default rule named default_rule is already in place. You can edit this default rule or create a new custom rule.

Network load balancing rules.PNG

To configure a rule, click the Edit button located next to it, after which you will be redirected to the Configuration window.

Network load balancing rules configuration v1.PNG

field name value description
Source address ip; Default: none Source IP address. Can be specified in CIDR notation (eg "192.168.1.0/24" without quotes).
Source port number; Default: none Source port number. May be entered as a single or multiple ports (eg "21" or "80,443" without quotes).
Destination address ip; Default: none Destination IP address. Can be specified in CIDR notation (eg "192.168.1.0/24" without quotes).
Destination port number; Default: none Destination port number. May be entered as a single or multiple ports (eg "21" or "80,443" without quotes).
Protocol all | ip | #hopopt | icmp | igmp | ggp | ipencap | st | tcp | egp | igp | pup | udp | hmp | xns | rdp | iso | xtp | ddp | idpr | ipv6 | ipv6 | ipv6 | idrp | rsvp | gre | esp | ah | skip | ipv6 | ipv6 | ipv6 | rspf | vmtp | eigrp | ospf | ax | ipip | etherip | encap | pim | ipcomp | vrrp | l2tp | isis | sctp | fc; Default: all Which protocol to use.
Policy assigned policies; Default: balanced Policy to use for this rule.

[[Category:{{{name}}} WebUI]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rut_manual_load_balancing&oldid=55993"