Difference between revisions of "Template:Networking rut manual services"

From Teltonika Networks Wiki
Line 3: Line 3:
 
   | RUT2XX = {{{series}}}_R_00.01.12
 
   | RUT2XX = {{{series}}}_R_00.01.12
 
   | RUT850 = {{{series}}}_R_00.01.04
 
   | RUT850 = {{{series}}}_R_00.01.04
   | RUT9XX = {{{series}}}_R_00.06.06}}
+
   | RUT9XX = {{{series}}}_R_00.06.07}}
 
}}
 
}}
 
__TOC__
 
__TOC__

Revision as of 13:11, 17 September 2020

The information in this page is updated in accordance with the [[Media:_WEBUI.bin|]] firmware version.

Summary

The Services page is used for easy service management. From here you can monitor your device's services services states. By click of a button access respective section where it was originally configured.

Services

The Services table displays the status of most of the device's services. Services that are currently inactive are displayed in a red  font, while active ones are highlighted in green.

The figure below is an example of the Services page:

[[File:{{{file_services}}}|border|class=tlt-border]]

Click the zone next to a service where it says "Change settings" and you will redirected to configuration page.

Additional notes:

  • By default, only [[{{{name}}} NTP|NTP]] and [[{{{name}}} SMS Utilities|SMS Utilities]] services are enabled
  • Some services have to be installed via [[{{{name}}} Package Manager|Package Manager]], before they can be visible.

[[Category:{{{name}}} Status section]]