Difference between revisions of "Template:Networking rut manual services legacy"

From Teltonika Networks Wiki
(One intermediate revision by the same user not shown)
Line 3: Line 3:
 
   | RUT2XX = {{{series}}}_R_00.01.14
 
   | RUT2XX = {{{series}}}_R_00.01.14
 
   | RUT850 = {{{series}}}_R_00.01.04
 
   | RUT850 = {{{series}}}_R_00.01.04
   | RUT9XX = {{{series}}}_R_00.06.08.1}}
+
   | RUT9XX = {{{series}}}_R_00.06.08.3}}
 
}}
 
}}
  

Revision as of 09:47, 19 July 2021

The information in this page is updated in accordance with firmware version [[Media:_WEBUI.bin|]].

Note: this user manual page is for {{{name}}}'s old WebUI style available in earlier FW versions. [[{{{name}}} Services|Click here]] for information based on the latest FW version.

Summary

The Services page is used for easy service management. From here you can monitor your device's services states. Click a button to access respective section where it was originally configured.

This chapter of the user manual provides an overview of the Services page for {{{name}}} devices.

Services

The Services page displays the status of most of the device's services. Services that are currently inactive are displayed in a red font, while active ones are highlighted in green.

The figure below is an example of the Services page:

[[File:Networking_{{{name}}}_manual_services.png|border|class=tlt-border]]

Click the zone next to a service where it says "Change settings" and you will redirected to configuration page.

Additional notes:

  • By default, only [[{{{name}}} NTP|NTP]] and [[{{{name}}} SMS Utilities|SMS Utilities]] services are enabled
  • Some services have to be installed via [[{{{name}}} Package Manager|Package Manager]], before they can be visible.

[[Category:{{{name}}} Status section (legacy)]]