Template:Networking rut manual upnp

From Teltonika Networks Wiki

Summary

UPnP allows clients in the local network to automatically configure the router. This chapter is a summary of the UPnP function in RUT routers

The information in this page is updated in accordance with the [[Media:{{{fw_version}}}_WEBUI.bin|{{{fw_version}}}]] firmware version.

Active UPnP Redirects

[[File:{{{file_redirects}}}|border|class=tlt-border]]

General Settings

[[File:{{{file_settings1}}}|border|class=tlt-border]]

field name value description
Enabled yes | no; default: no Turns the UPNP service on or off.
Enable secure mode yes | no; default: yes Allow adding forwards only to requesting IP addresses
Enable additional logging yes | no; default: no Puts extra debugging information into the system log
Downlink Default: 1024 Value in KByte/s, informational only
Uplink Default: 512 Value in KByte/s, informational only
Port Default: 5000 Port to listen for requests

Advanced Settings

[[File:{{{file_settings2}}}|border|class=tlt-border]]

field name value description
Report system instead of daemon uptime yes | no; default: no
Device UUID
Announced serial number
Announced model number
Notify interval
Clean rules threshold
Clean rules interval
Presentation URL
UPnP lease file

UPnP ACLs

ACLs specify which external ports may be redirected to which internal addresses and ports

[[File:{{{file_ACLs}}}|border|class=tlt-border]]

field name value description
Comment Default: Allow high ports Adds a comment to this rule
External ports Default: 1024-65535 External port(s) which may be redirected. May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers
Internal Addresses Default: 0.0.0.0/0 Internal address to be redirect to
Internal ports Default: 1024-65535 Internal port(s) to be redirect to May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers
Action Default: allow Allows or forbids the UPnP service to open the specified port