Template:Networking rut manual upnp

From Teltonika Networks Wiki

Summary

UPnP allows clients in the local network to automatically configure the router. This chapter is a summary of the UPnP function in RUT routers

The information in this page is updated in accordance with the [[Media:{{{fw_version}}}_WEBUI.bin|{{{fw_version}}}]] firmware version.

Active UPnP Redirects

[[File:{{{file_redirects}}}|border|class=tlt-border]]

General Settings

[[File:{{{file_settings1}}}|border|class=tlt-border]]

field name value description
Enabled no | yes; Default: no Toggles UPnP ON or OFF
Enable secure mode >no | yes; Default: yes Toggles Secure mode ON or OFF
Enable additional logging >no | yes; Default: no Puts extra debugging information into the system log
Downlink integer; Default: 1024 Bandwidth available for traffic coming in from the external interface in kilobytes per second. Note that this only information given to clients, it doesn't control the speed.
Uplink integer; Default: 512 Bandwidth available for traffic out the external interface in kilobytes per second. Note that this only information given to clients, it doesn't control the speed.
Port integer [1..65535]; Default: 5000 Port to listen for requests

Advanced Settings

[[File:{{{file_settings2}}}|border|class=tlt-border]]

field name value description
Report system instead of daemon uptime >no | yes; Default: yes Use system uptime as UPnP uptime
Device UUID string; Default: unique The Device UUID attribute specifies and uniquely identifies a device that supports Universal Plug and Play (UPnP)
Announced serial number string; Default: " " Specifies serial number for XML Root Desc.
Announced model number string; Default: " " Specifies model number for XML Root Desc.
Notify interval integer; Default: " " Interval in which UPnP capable devices send a message to announce their services
Clean ruler threshold integer; Default: " " Minimum number of redirections before clearing rules table of old (active) redirections
Clean ruler interval integer; Default: " " Number of seconds before cleaning redirections
Presentation URL string; Default: " " Presentation url used for the Root Desc.
UPnP lease file string; Default: /var/upnp.leases Stores active UPnP redirects in a lease file (specified), like DHCP leases

UPnP ACLs

ACLs specify which external ports may be redirected to which internal addresses and ports. There are two preconfigured rules, one to allow high ports, and another to deny the rest. Highest priority is at the top of a list and goes down. To add another specific rule press add button

[[File:{{{file_ACLs}}}|border|class=tlt-border]]

field name value description
Comment string; Default: " " Adds a comment to this rule
External ports integer [0..65535]] | range of integers [0-65535]; Default: " " External port(s) which may be redirected. May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers
Internal Addresses ip/integer [0..32]; Default: " " Internal address to be redirect to
Internal ports integer [0..65535]] | range of integers [0-655355]; Default: " " Internal port(s) to be redirect to May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers
Action allow | deny; Default: allow Allows or forbids the UPnP service to open the specified port

[[Category:{{{name}}} WebUI]]