Template:Networking rut manual user scripts

From Teltonika Networks Wiki
Revision as of 10:00, 26 July 2019 by Dziugas (talk | contribs) (Created page with "__TOC__ ==Summary== The <b>User Scripts</b> function allows users to write their own shell scripts that will be executed during the router's booting process. This page is an...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Summary

The User Scripts function allows users to write their own shell scripts that will be executed during the router's booting process. This page is an overview of the User Scripts function in {{{name}}} routers.

Startup script management

The startup script management section shows the contents of the /etc/rc.local file and allows the user to edit it. This scripts written in this file are executed at the end of the device's start up process. You can also execute the script via a command line interface with the following command:

sh /etc/rc.local

The figure below is an example of the startup script management section:

[[File:{{{file_scripts}}}]]

[[Category:{{{name}}} WebUI]]