Changes

If you are using the device you are trying to set up as your WAN source when visiting this website, it should automatically assign your IP address to that hostname you have just created. If it does not, or you are using a different WAN source, you can change the IP address.

If you are using the device you are trying to set up as your WAN source when visiting this website, it should automatically assign your IP address to that hostname you have just created. If it does not, or you are using a different WAN source, you can change the IP address.

[[File:Networking rutos configuration example ddns dynu confirm v1.png|border|class=tlt-border]]

[[File:Networking rutos configuration example ddns dynu confirm v1.png|border|class=tlt-border]]

# Confirm or change the public IP

# Confirm or change the '''public IP'''

# Click on '''+ Add''' button

# Click on '''+ Add''' button

</br>

</br>

----

----

If you did a right procedure, will be shown your DDNS services list, confirm if your domain and public IP are right. If it is, the [www.dynu.com dynu.com] setup is finished.

If you did a right procedure, will be shown your DDNS services list, confirm if your domain and public IP are right. If it is, the [https://www.dynu.com dynu.com] setup is finished.

[[File:Networking rutos configuration example ddns dynu list v1.png|border|class=tlt-border]]

[[File:Networking rutos configuration example ddns dynu list v1.png|border|class=tlt-border]]

Now apply the following configuration:

Now apply the following configuration:

[[File:Networking rutos configuration example ddns configuration dynu v1.png|border|class=tlt-border]]

[[File:Networking_rutos_configuration_example_ddns_configuration_noip_v1.png|1100px|border|class=tlt-border]]

# Check the '''Enable''' box.

# Check the '''Enable''' box.

# Type your '''Lookup hostname'''.

# Type your '''Lookup hostname'''.

# Select '''DDNS Service provider: no-ip.com'''

# Select '''DDNS Service provider: no-ip.com'''

# Type your '''Dynu''' '''Domain'''.

# Type your '''noip''' '''Domain'''.

# Type your '''Dynu''' '''Username'''.

# Type your '''noip''' '''Username'''.

# Type your '''Dynu''' '''Password'''.

# Type your '''noip''' '''Password'''.

# Set '''IP address source''' to '''Public'''.

# Set '''IP address source''' to '''Public'''.

# Click '''Save & Apply''' button.

# Click '''Save & Apply''' button.

Wait for about '''5''' minutes from the time you saved the changes. In the '''Status''' column, you should see the last time the DDNS was updated and whether the service is running. (If it does not change for a while, try changing the '''Check''' and '''Force intervals''' in DDNS settings, or reboot your {{{device}}}).

Wait for about '''5''' minutes from the time you saved the changes. In the '''Status''' column, you should see the last time the DDNS was updated and whether the service is running. (If it does not change for a while, try changing the '''Check''' and '''Force intervals''' in DDNS settings, or reboot your {{{device}}}).

 

[[File:Networking rutos configuration example ddns configuration noip test 1 v2.png|1100px|border|class=tlt-border]]

[[File:Networking rutos configuration example ddns configuration noip test 1 v2.png|1100px|border|class=tlt-border]]