Template:Networking rutos manual custom scripts

From Teltonika Networks Wiki
Revision as of 14:41, 7 May 2020 by Dziugas (talk | contribs) (Created page with "{{Template:Networking_rutos_manual_fw_disclosure | fw_version = {{{series}}}_R_00.02.03 | series = {{{series}}} }} __TOC__ ==Summary== The <b>User Scripts</b> function a...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

The information in this page is updated in accordance with firmware version [[Media:{{{series}}}_R_00.02.03_WEBUI.bin|{{{series}}}_R_00.02.03]].


The User Scripts function allows users to write their own shell scripts that will be executed during the device's booting process. This page is an overview of the User Scripts function in {{{name}}} devices.

Startup Script

The Startup Script section shows the contents of the /etc/rc.local file and allows the user to edit it. This scripts written in this file are executed at the end of the device's boot cycle. You can also execute the script via a command line interface with the following command:

sh /etc/rc.local

The figure below is an example of the Startup Script management section:

File:Networking trb manual user scripts v1.png

[[Category:{{{name}}} System section]]