9,291
edits
Changes
Template:Networking rutos manual gps (view source)
Revision as of 18:05, 22 November 2021
, 18:05, 22 November 2021no edit summary
<!-- Template uses {{{name}}}, {{{series}}} -->
<!-- Template uses {{{name}}}, {{{series}}} -->
{{Template: Networking_rutos_manual_fw_disclosure
{{Template: Networking_rutos_manual_fw_disclosure
| fw_version = {{{series}}}_R_00.02.06.1
| fw_version = {{{series}}}_R_00.07.01{{#ifeq:{{{series}}}|RUT9|.1|}}
| series = {{{series}}}
| series = {{{series}}}
}}
}}
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} GPS (legacy WebUI)|click here]]</b> for the old style WebUI (FW version RUT9XX_R_00.06.08.3 and earlier) user manual page.</i>|}}
==Summary==
==Summary==
The <b>Global Positioning System</b> (<b>GPS</b>) is a space-based radionavigation system. This page is an overview of the GPS service in {{{name}}} devices.
The <b>Global Positioning System</b> (<b>GPS</b>) is a space-based radionavigation system. This page is an overview of the GPS service in {{{name}}} devices.
==General==
==General==
<span class="asterisk">*</span>Changing these options requires a modem reboot. Therefore, if you make changes to these options and save them, the device will lose cellular connectivity for about 30 seconds.
<span class="asterisk">*</span>Changing these options requires a modem reboot. Therefore, if you make changes to these options and save them, the device will lose cellular connectivity for about 30 seconds.
==Map==
The <b>Map</b> page displays the device's current coordinates and position on the map. To see the device's location on the map, make sure to attach the GPS antenna on the device and enable GPS in the [[#General|General]] page.
The figure below is an example of the Map page:
[[File:Networking_rutos_manual_gps_map.png|border|class=tlt-border]]
==NMEA==
==NMEA==
The <b>NMEA forwarding</b> section is used to configure and enable NMEA forwarding. The figure below is an example of the NMEA forwarding section and the table below provides information on the fields contained in that section:
The <b>NMEA forwarding</b> section is used to configure and enable NMEA forwarding. The figure below is an example of the NMEA forwarding section and the table below provides information on the fields contained in that section:
[[File:Networking_rutos_manual_gps_nmea_nmea_forwarding.png]]
[[File:Networking_rutos_manual_gps_nmea_nmea_forwarding.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<tr>
<tr>
<td>Hostname</td>
<td>Hostname</td>
<td>ip | host; default: '''192.168.1.5'''</td>
<td>ip | host; default: '''none'''</td>
<td>IP address or hostname of the server to which NMEA data will be forwarded.</td>
<td>IP address or hostname of the server to which NMEA data will be forwarded.</td>
</tr>
</tr>
</tr>
</tr>
<tr>
<tr>
<td>Location</td>
<td>File</td>
<td>filepath; default: <b>none</b></td>
<td>filepath; default: <b>none</b></td>
<td>Location of the file where NMEA sentences will be stored. This field becomes visible only when NMEA collecting is enabled.</td>
<td>Location of the file where NMEA sentences will be stored. This field becomes visible only when NMEA collecting is enabled.</td>
<tr>
<tr>
<td>Enabled</td>
<td>Enabled</td>
<td>off | on; default: <b>off</b></td>
<td>off | <span style="color: #20C0D7;"><b>on</b></span> default: <b>off</b></td>
<td>Turns data sending to HTTP/HTTPS server on or off.</td>
<td>Turns data sending to HTTP/HTTPS server on or off.</td>
</tr>
</tr>
<tr>
<tr>
<td>URL</td>
<td><span style="color: #20C0D7;">URL</span></td>
<td>url string; default: <b>192.168.1.5</b></td>
<td>url string; default: <b>192.168.1.5</b></td>
<td>URL of remote server.</td>
<td>URL of remote server.<br><i>This field becomes visible when Enabled is set to 'on'.</i></td>
</tr>
</tr>
<tr>
<tr>
<td>Delay</td>
<td><span style="color: #20C0D7;">Delay</span></td>
<td>integer; default: <b>5</b></td>
<td>integer; default: <b>5</b></td>
<td>Time interval in seconds between sending packages.</td>
<td>Time interval in seconds between sending packages.<br><i>This field becomes visible when Enabled is set to 'on'.</i></td>
</tr>
</tr>
</table>
</table>
----
----
The <b>TAVL settings</b> section is used to select which data will be sent to the TAVL server:
The <b>TAVL settings</b> section is used to select which data will be sent to the TAVL server:
{{#ifeq: {{{name}}} | RUT955 | [[File:Networking_rut955_manual_gps_https_tavl_settings.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_gps_https_tavl_settings.png|border|class=tlt-border]]
| [[File:Networking_rutos_manual_gps_https_tavl_settings.png|border|class=tlt-border]]
}}
<table class="nd-mantable">
<table class="nd-mantable">
</tr>
</tr>
<tr>
<tr>
<td>Send GSM signal</td>
<td>Signal</td>
<td>off | on; default: <b>off</b></td>
<td>off | on; default: <b>off</b></td>
<td>Includes GSM signal strength information in the GPS data sent to server.</td>
<td>Includes GSM signal strength information in the GPS data sent to server.</td>
</tr>
</tr>
<tr>
<tr>
<td>Send digital input</td>
<td>Input/Output (<i>various</i>)</td>
<td>off | on; default: <b>off</b></td>
<td>off | on; default: <b>off</b></td>
<td>Includes digital input state in the GPS data sent to server.</td>
<td>Includes Input/Output status information in the GPS data sent to server.</td>
</tr>
</tr>
</table>
</table>
<td>off | on; default: <b>off</b></td>
<td>off | on; default: <b>off</b></td>
<td>Turns data sending to AVL server on or off.</td>
<td>Turns data sending to AVL server on or off.</td>
</tr>
<tr>
<td>Retry on Fail</td>
<td>off | on; default: <b>off</b></td>
<td>Turn retries in case of a failed attempts on or off. When turned on, the device will try to send the same data to the server until the transmission is successful.</td>
</tr>
</tr>
<tr>
<tr>
<td>Hostname</td>
<td>Hostname</td>
<td>ip | host; default: '''192.168.1.5'''</td>
<td>ip | host; default: <b>192.168.0.1</b></td>
<td>IP address or hostname of an AVL server.</td>
<td>IP address or hostname of an AVL server.</td>
</tr>
<tr>
<td>Protocol</td>
<td>TCP | UDP; Default: <b>TCP</b></td>
<td>Protocol that will be used for communication with the AVL server.</td>
</tr>
</tr>
<tr>
<tr>
</tr>
</tr>
<tr>
<tr>
<td>Protocol</td>
<td>Don't Contain Connection</td>
<td>TCP | UDP; Default: <b>TCP</b></td>
<td>off | on; default: <b>off</b></td>
<td>Protocol that will be used for communication with the AVL server.</td>
<td>When turned on, handles each AVL packet iteration as a new connection. When turned off, connects once and uses the same socket for future communication.</td>
</tr>
</tr>
</table>
</table>
Refer to the figure and table below for information on the configuration fields of the Secondary rules section.
Refer to the figure and table below for information on the configuration fields of the Secondary rules section.
[[File:Networking_rutos_manual_gps_avl_secondary_rules.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_gps_avl_secondary_rules_{{{series}}}_v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
</tr>
</tr>
<tr>
<tr>
<td>Digital Isolated Input</td>
<td>Ignore</td>
<td>Low logic level | High logic level | Both; default: <b>Low logic level</b></td>
<td>off | on; default: <b>off</b></td>
<td>If enabled, the rule ignores state of input.</td>
</tr>
<tr>
<td>IO level</td>
<td>Low level {{!}} High level {{!}} Both; default: <b>High level</b></td>
<td>Selects which input state will trigger the rule.</td>
<td>Selects which input state will trigger the rule.</td>
</tr>
<tr>
<td>IO type</td>
<td>GPIO; default: <b>GPIO</b></td>
<td>Selects input type.</td>
</tr>
<tr>
<td>IO name</td>{{#switch:{{{series}}}
| RUT9 =<td>Input (3) {{!}} Input (1) {{!}} Isolated Input (2,7); default: <b>Input (1)</b></td>
| RUTX =<td>Input (4); default: <b>Input (3)</b></td>
| TRB2 =<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>}}
<td>Selects which specific input will trigger the rule.</td>
</tr>
</tr>
<tr>
<tr>
