Template:Networking rutos manual guest network

From Teltonika Networks Wiki

The information in this page is updated in accordance with firmware version .

Summary

Network security is extremely important. If your WiFi network is not properly secured, it makes you and all of your home or office resources vulnerable to a variety of security threats. To stay ahead of the curve, many companies and home users have guest WiFi. Unlike your regular WiFi network that you or your company members use, the guest WiFi network restricts what your guests can do in your network. It gives visitors access to the Internet connection, but nothing else making you or your company a lot more secure. This chapter is a guide on configuring a guest WiFi.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Basic WebUI" mode. You can do that by clicking the "Advanced" button under "Mode", which is located at the top-right corner of the WebUI.

General

The General section is used to configure access to local network and control of other guests reachability.

Networking tcr manual guest network general.png

Field Value Description
Allow access to local network off | on; default: off Enables access to local network
Allow guests to see each other off | on; default: off Enables access to reach other guests

Guest 2.4GHZ WIFI

The Guest 2.4GHZ WIFI section is used to configure 2.4GHZ wireless guest network.

Networking tcr manual guest network 24ghz.png

Field Value Description
Enable off | on; default: off Enables 2.4GHZ wireless guest network
ESSID guest_wifi; default: guest_wifi Extended Service Set Identifier.
Hide ESSID off | on; default: off Hide extended Service Set Identifier.
Password blank; default: none Custom passphrase used for authentication (at least 8 characters long).
WPS off | on; default: off Enable WPS push-button configuration method. It can only be enabled for a single wireless interface.

Guest 5GHZ WIFI

The Guest 5GHZ WIFI section is used to configure 5GHZ wireless guest network.

Networking tcr manual guest network 5ghz.png

Field Value Description
Enable off | on; default: off Enables 2.4GHZ wireless guest network
ESSID guest_wifi; default: guest_wifi Extended Service Set Identifier.
Hide ESSID off | on; default: off Hide extended Service Set Identifier.
Password blank; default: none Custom passphrase used for authentication (at least 8 characters long).
WPS off | on; default: off Enable WPS push-button configuration method. It can only be enabled for a single wireless interface.