Difference between revisions of "Template:Networking rutos manual leds"

From Teltonika Networks Wiki
(Created page with "This page contains information the different types of LEDs and their behaviour on a {{{name}}} router. ==Power LED== The <b>power LED</b> is located on the bottom left corne...")
 
Line 7: Line 7:
 
[[File:{{{file_power}}}]]
 
[[File:{{{file_power}}}]]
  
−
It can perform two different actions:
+
It indicates whether the router is powered on or not
  
 
<table class="nd-othertables_3">
 
<table class="nd-othertables_3">
 
     <tr>
 
     <tr>
−
         <th width=500>Action</th>
+
         <th width=500>State</th>
 
         <th width=500>Description</th>
 
         <th width=500>Description</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>LED turned on</td>
 
         <td>LED turned on</td>
−
         <td>Router is powered up</td>
+
         <td>Router is powered on</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>LED turned off</td>
 
         <td>LED turned off</td>
−
         <td>Router is not powered up</td>
+
         <td>Router is not powered on</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
  
 
==WiFi band LEDs==
 
==WiFi band LEDs==
 +
 +
The <b>WiFi band LEDs</b> are located at the bottom of the front panel of the router, to the left of the Ethernet ports.
  
 
[[File:{{{file_wifi}}}]]
 
[[File:{{{file_wifi}}}]]
 +
 +
They display whether a WiFi Access Point (AP) is active on a specific band.
  
 
<table class="nd-othertables_3">
 
<table class="nd-othertables_3">
 
     <tr>
 
     <tr>
−
         <th width=500>Action</th>
+
         <th width=500>State</th>
 
         <th width=500>Description</th>
 
         <th width=500>Description</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td></td>
+
         <td>2.4 LED turned on</td>
−
         <td></td>
+
         <td>At least one 2.4 GHz Access Point is running</td>
 +
    </tr>
 +
    <tr>
 +
        <td>2.4 LED turned off</td>
 +
        <td>No 2.4 GHz Access Points are running</td>
 +
    </tr>
 +
    <tr>
 +
        <td>5 LED turned on</td>
 +
        <td>At least one 5 GHz Access Point is running</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td></td>
+
         <td>5 LED turned off</td>
−
         <td></td>
+
         <td>No 5 GHz Access Points are running</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
  
 
==WAN type LEDs==
 
==WAN type LEDs==
 +
 +
The <b>WAN type LEDs</b> are located at the top-right of the front panel.
  
 
[[File:{{{file_wan}}}]]
 
[[File:{{{file_wan}}}]]
 +
 +
They indicate which type of Internet connection is currently active.
  
 
<table class="nd-othertables_3">
 
<table class="nd-othertables_3">
 
     <tr>
 
     <tr>
−
         <th width=500>Action</th>
+
         <th width=500>State</th>
 
         <th width=500>Description</th>
 
         <th width=500>Description</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td></td>
+
         <td>SIM1 LED on</td>
−
         <td></td>
+
         <td>A mobile data connection on SIM1 is active.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>SIM1 LED off</td>
 +
        <td>A mobile data connection on SIM1 is inactive.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>SIM2 LED on</td>
 +
        <td>A mobile data connection on SIM2 is active.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>SIM2 LED off</td>
 +
        <td>A mobile data connection on SIM2 is inactive.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>WiFi LED on</td>
 +
        <td>A WiFi data connection (WiFi WAN) is active.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>WiFi LED off</td>
 +
        <td>A WiFi data connection (WiFi WAN) is inactive.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>ETH LED on</td>
 +
        <td>An Ethernet data connection (wired WAN) is active.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td></td>
+
         <td>ETH LED off</td>
−
         <td></td>
+
         <td>An Ethernet data connection (wired WAN) is inactive.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
Line 67: Line 107:
  
 
[[File:{{{file_ethernet}}}]]
 
[[File:{{{file_ethernet}}}]]
 +
 +
They provide information on the current states of the Ethernet ports. Each port has two LEDs:
 +
 +
<ul>
 +
    <li><span style="color: orange;"><b>Orange</b></span> - 10/100 Mbps connection</li>
 +
    <li><span style="color: green;"><b>Green</b></span> - 1000 Mbps connection</li>
 +
</ul>
 +
 +
Below is an explanation on the behaviours of green and orange LEDs.
  
 
<table class="nd-othertables_3">
 
<table class="nd-othertables_3">
 
     <tr>
 
     <tr>
−
         <th width=500>Action</th>
+
         <th width=500>State</th>
 
         <th width=500>Description</th>
 
         <th width=500>Description</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td></td>
+
         <td>LED on</td>
−
         <td></td>
+
         <td>A data connection on the port is operational (cable plugged in, end device visible, no data is being transferred)</td>
 +
    </tr>
 +
    <tr>
 +
        <td>LED off</td>
 +
        <td>No data connection on the port is operational (no cable, bad cable or end device not visible for some other reason (such as damaged network card))</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td></td>
+
         <td>LED blinking</td>
−
         <td></td>
+
         <td>Connection established and data is being transferred over this port</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
−
 
−
{{Template: rut_ethernet_port_led_table}}
 
−
 
−
<span class="asterisk">*</span> The <b>bootloader menu</b> is a special router state from which certain upgrades can be performed. For more information on the bootloader menu, click [[Bootloader menu|here]]
 
  
 
==Mobile network type LEDs==
 
==Mobile network type LEDs==
Line 92: Line 141:
  
 
[[File:{{{file_net_type}}}]]
 
[[File:{{{file_net_type}}}]]
 +
 +
They display which type of Internet connection is currently active.
  
 
<table class="nd-othertables_3">
 
<table class="nd-othertables_3">
Line 107: Line 158:
 
     </tr>
 
     </tr>
 
</table>
 
</table>
−
 
−
{{Template: rut9xx_connection_status_led_table
 
−
| 4g = 1
 
−
}}
 
  
 
==Mobile signal strength indication LEDs==
 
==Mobile signal strength indication LEDs==
Line 117: Line 164:
  
 
[[File:{{{file_signal}}}]]
 
[[File:{{{file_signal}}}]]
 +
 +
The number of lit up LEDs represents a different mobile signal strength value in dBm for the currently active SIM card.
  
 
<table class="nd-othertables_3">
 
<table class="nd-othertables_3">
 
     <tr>
 
     <tr>
−
         <th width=500>Action</th>
+
         <th width=500>No. of lit up LEDS</th>
−
         <th width=500>Description</th>
+
         <th width=500>Signal strength</th>
 +
    </tr>
 +
    <tr>
 +
        <td>0</td>
 +
        <td>≤ -111 dBm</td>
 +
    </tr>
 +
    <tr>
 +
        <td>1</td>
 +
        <td>-110 dBm to -97 dBm</td>
 +
    </tr>
 +
    <tr>
 +
        <td>2</td>
 +
        <td>-96 dBm to -82 dBm</td>
 +
    </tr>
 +
    <tr>
 +
        <td>3</td>
 +
        <td>-81 dBm -67 dBm</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td></td>
+
         <td>4</td>
−
         <td></td>
+
         <td>-66 dBm to -52 dBm</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td></td>
+
         <td>5</td>
−
         <td></td>
+
         <td>≥ -51 dBm</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
−
 
−
{{signal strength leds table}}
 
  
 
[[Category:{{{name}}} Manual]]
 
[[Category:{{{name}}} Manual]]

Revision as of 22:21, 27 April 2020

This page contains information the different types of LEDs and their behaviour on a {{{name}}} router.

Power LED

The power LED is located on the bottom left corner of the front panel, just under the power connector.

[[File:{{{file_power}}}]]

It indicates whether the router is powered on or not

State Description
LED turned on Router is powered on
LED turned off Router is not powered on

WiFi band LEDs

The WiFi band LEDs are located at the bottom of the front panel of the router, to the left of the Ethernet ports.

[[File:{{{file_wifi}}}]]

They display whether a WiFi Access Point (AP) is active on a specific band.

State Description
2.4 LED turned on At least one 2.4 GHz Access Point is running
2.4 LED turned off No 2.4 GHz Access Points are running
5 LED turned on At least one 5 GHz Access Point is running
5 LED turned off No 5 GHz Access Points are running

WAN type LEDs

The WAN type LEDs are located at the top-right of the front panel.

[[File:{{{file_wan}}}]]

They indicate which type of Internet connection is currently active.

State Description
SIM1 LED on A mobile data connection on SIM1 is active.
SIM1 LED off A mobile data connection on SIM1 is inactive.
SIM2 LED on A mobile data connection on SIM2 is active.
SIM2 LED off A mobile data connection on SIM2 is inactive.
WiFi LED on A WiFi data connection (WiFi WAN) is active.
WiFi LED off A WiFi data connection (WiFi WAN) is inactive.
ETH LED on An Ethernet data connection (wired WAN) is active.
ETH LED off An Ethernet data connection (wired WAN) is inactive.

Ethernet port LEDs

There are two LEDs located at the top of each Ethernet port.

[[File:{{{file_ethernet}}}]]

They provide information on the current states of the Ethernet ports. Each port has two LEDs:

  • Orange - 10/100 Mbps connection
  • Green - 1000 Mbps connection

Below is an explanation on the behaviours of green and orange LEDs.

State Description
LED on A data connection on the port is operational (cable plugged in, end device visible, no data is being transferred)
LED off No data connection on the port is operational (no cable, bad cable or end device not visible for some other reason (such as damaged network card))
LED blinking Connection established and data is being transferred over this port

Mobile network type LEDs

The mobile network type LEDs are located just above the first SIM holder.

[[File:{{{file_net_type}}}]]

They display which type of Internet connection is currently active.

Action Description

Mobile signal strength indication LEDs

The mobile signal strength indication LEDs are located just above the second SIM holder.

[[File:{{{file_signal}}}]]

The number of lit up LEDs represents a different mobile signal strength value in dBm for the currently active SIM card.

No. of lit up LEDS Signal strength
0 ≤ -111 dBm
1 -110 dBm to -97 dBm
2 -96 dBm to -82 dBm
3 -81 dBm -67 dBm
4 -66 dBm to -52 dBm
5 ≥ -51 dBm

[[Category:{{{name}}} Manual]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_leds&oldid=60529"