Difference between revisions of "Template:Networking rutos manual leds"
| Line 5: | Line 5: | ||
The <b>power LED</b> is located on the bottom left corner of the front panel, just under the power connector. | The <b>power LED</b> is located on the bottom left corner of the front panel, just under the power connector. | ||
| − | [[File:{{{file_power}}}]] | + | [[File:{{{file_power}}}|400px]] |
It indicates whether the router is powered on or not | It indicates whether the router is powered on or not | ||
| Line 28: | Line 28: | ||
The <b>WiFi band LEDs</b> are located at the bottom of the front panel of the router, to the left of the Ethernet ports. | The <b>WiFi band LEDs</b> are located at the bottom of the front panel of the router, to the left of the Ethernet ports. | ||
| − | [[File:{{{file_wifi}}}]] | + | [[File:{{{file_wifi}}}|400px]] |
They display whether a WiFi Access Point (AP) is active on a specific band. | They display whether a WiFi Access Point (AP) is active on a specific band. | ||
| Line 59: | Line 59: | ||
The <b>WAN type LEDs</b> are located at the top-right of the front panel. | The <b>WAN type LEDs</b> are located at the top-right of the front panel. | ||
| − | [[File:{{{file_wan}}}]] | + | [[File:{{{file_wan}}}|400px]] |
They indicate which type of Internet connection is currently active. | They indicate which type of Internet connection is currently active. | ||
| Line 106: | Line 106: | ||
There are two <b>LEDs</b> located at the top of each <b>Ethernet port</b>. | There are two <b>LEDs</b> located at the top of each <b>Ethernet port</b>. | ||
| − | [[File:{{{file_ethernet}}}]] | + | [[File:{{{file_ethernet}}}|400px]] |
They provide information on the current states of the Ethernet ports. Each port has two LEDs: | They provide information on the current states of the Ethernet ports. Each port has two LEDs: | ||
| Line 140: | Line 140: | ||
The <b>mobile network type LEDs</b> are located just above the first SIM holder. | The <b>mobile network type LEDs</b> are located just above the first SIM holder. | ||
| − | [[File:{{{file_net_type}}}]] | + | [[File:{{{file_net_type}}}|400px]] |
They display which type of Internet connection is currently active. | They display which type of Internet connection is currently active. | ||
| Line 163: | Line 163: | ||
The <b>mobile signal strength indication LEDs</b> are located just above the second SIM holder. | The <b>mobile signal strength indication LEDs</b> are located just above the second SIM holder. | ||
| − | [[File:{{{file_signal}}}]] | + | [[File:{{{file_signal}}}|400px]] |
The number of lit up LEDs represents a different mobile signal strength value in dBm for the currently active SIM card. | The number of lit up LEDs represents a different mobile signal strength value in dBm for the currently active SIM card. | ||
Revision as of 22:28, 27 April 2020
This page contains information the different types of LEDs and their behaviour on a {{{name}}} router.
Power LED
The power LED is located on the bottom left corner of the front panel, just under the power connector.
[[File:{{{file_power}}}|400px]]
It indicates whether the router is powered on or not
| State | Description |
|---|---|
| LED turned on | Router is powered on |
| LED turned off | Router is not powered on |
WiFi band LEDs
The WiFi band LEDs are located at the bottom of the front panel of the router, to the left of the Ethernet ports.
[[File:{{{file_wifi}}}|400px]]
They display whether a WiFi Access Point (AP) is active on a specific band.
| State | Description |
|---|---|
| 2.4 LED turned on | At least one 2.4 GHz Access Point is running |
| 2.4 LED turned off | No 2.4 GHz Access Points are running |
| 5 LED turned on | At least one 5 GHz Access Point is running |
| 5 LED turned off | No 5 GHz Access Points are running |
WAN type LEDs
The WAN type LEDs are located at the top-right of the front panel.
[[File:{{{file_wan}}}|400px]]
They indicate which type of Internet connection is currently active.
| State | Description |
|---|---|
| SIM1 LED on | A mobile data connection on SIM1 is active. |
| SIM1 LED off | A mobile data connection on SIM1 is inactive. |
| SIM2 LED on | A mobile data connection on SIM2 is active. |
| SIM2 LED off | A mobile data connection on SIM2 is inactive. |
| WiFi LED on | A WiFi data connection (WiFi WAN) is active. |
| WiFi LED off | A WiFi data connection (WiFi WAN) is inactive. |
| ETH LED on | An Ethernet data connection (wired WAN) is active. |
| ETH LED off | An Ethernet data connection (wired WAN) is inactive. |
Ethernet port LEDs
There are two LEDs located at the top of each Ethernet port.
[[File:{{{file_ethernet}}}|400px]]
They provide information on the current states of the Ethernet ports. Each port has two LEDs:
- Orange - 10/100 Mbps connection
- Green - 1000 Mbps connection
Below is an explanation on the behaviours of green and orange LEDs.
| State | Description |
|---|---|
| LED on | A data connection on the port is operational (cable plugged in, end device visible, no data is being transferred) |
| LED off | No data connection on the port is operational (no cable, bad cable or end device not visible for some other reason (such as damaged network card)) |
| LED blinking | Connection established and data is being transferred over this port |
Mobile network type LEDs
The mobile network type LEDs are located just above the first SIM holder.
[[File:{{{file_net_type}}}|400px]]
They display which type of Internet connection is currently active.
| Action | Description |
|---|---|
Mobile signal strength indication LEDs
The mobile signal strength indication LEDs are located just above the second SIM holder.
[[File:{{{file_signal}}}|400px]]
The number of lit up LEDs represents a different mobile signal strength value in dBm for the currently active SIM card.
| No. of lit up LEDS | Signal strength |
|---|---|
| 0 | ≤ -111 dBm |
| 1 | -110 dBm to -97 dBm |
| 2 | -96 dBm to -82 dBm |
| 3 | -81 dBm -67 dBm |
| 4 | -66 dBm to -52 dBm |
| 5 | ≥ -51 dBm |
[[Category:{{{name}}} Manual]]
