31,703
edits
Changes
Template:Networking rutos manual leds (view source)
Revision as of 14:57, 31 August 2020
, 14:57, 31 August 2020no edit summary
<th width=500>Action</th>
<th width=500>Action</th>
<th width=500>Description</th>
<th width=500>Description</th>
</tr>
</tr>{{#ifeq: {{{2g}}} | 1 |
<tr>
<td>2G LED turned on</td>
<td>Device is connected to a 2G network.</td>
</tr>|}}
<tr>
<tr>
<td>3G LED turned on</td>
<td>3G LED turned on</td>
<td>4G LED turned on</td>
<td>4G LED turned on</td>
<td>Device is connected to a 4G network.</td>
<td>Device is connected to a 4G network.</td>
</tr>
</tr>{{#ifeq: {{{2g}}} | 1 |
<tr>
<td>2G blinking</td>
<td>Device is connected to a 2G network but hasn't received an IP address.</td>
</tr>|}}
<tr>
<tr>
<td>3G blinking</td>
<td>3G blinking</td>
</tr>
</tr>
<tr>
<tr>
<td>3G & 4G LEDs blinking at the same time every 500 ms</td>
<td>{{#ifeq:{{{2g}}}|1|2G,|}} 3G & 4G LEDs blinking at the same time every 500 ms</td>
<td>No SIM card or incorrect PIN.</td>
<td>No SIM card or incorrect PIN.</td>
</tr>
</tr>
<tr>
<tr>
<td>3G & 4G LEDs turns on and off in a sequence one after the other</td>
<td>{{#ifeq:{{{2g}}}|1|2G,|}} 3G & 4G LEDs turns on and off in a sequence one after the other</td>
<td>The device is attempting to connect to a mobile network operator.</td>
<td>The device is attempting to connect to a mobile network operator.</td>
</tr>
</tr>
