Template:Networking rutos manual modbus modbus tcp set parameters table

From Teltonika Networks Wiki
Revision as of 08:08, 24 August 2021 by Gytispieze (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Set Parameters[edit source]


The Modbus daemon can also set some device parameters.

value to set register address register value description
Reboot 206 1 Reboots the router
Switch PIN 3 state 324 1|0 Toggles PIN 3 ON or OFF, when output is selected
Switch PIN 4 state 325 1|0 Toggles PIN 4 ON or OFF, when output is selected