Difference between revisions of "Template:Networking rutos manual network"

From Teltonika Networks Wiki
Line 149: Line 149:
 
         <td>Mobile connection connection type. Possible values are:
 
         <td>Mobile connection connection type. Possible values are:
 
             <ul>
 
             <ul>
 +
                <li> <b>4G</b>:
 +
{{#ifeq: {{{name}}} | TRB255 |
 +
4G (NB), 4G (M1)
 +
| 4G (LTE) }}
 +
</li>
 +
 +
{{#ifeq: {{{name}}} | TRB255 | |
 
                 <li> <b>3G</b>: 3G (WCDMA), 3G (HSDPA), 3G (HSUPA), 3G (HSPA), 3G (HSPA+), 3G (DC-HSPA+), 3G (HSDPA+HSUPA), UMTS</li>
 
                 <li> <b>3G</b>: 3G (WCDMA), 3G (HSDPA), 3G (HSUPA), 3G (HSPA), 3G (HSPA+), 3G (DC-HSPA+), 3G (HSDPA+HSUPA), UMTS</li>
                <li> <b>4G</b>: 4G (LTE)</li>
+
}}
 +
 
 +
{{#ifeq: {{{series}}} | RUTX | |
 +
                <li>2G: 2G (GSM), 2G (GPRS), 2G (EDGE)</li>
 +
}}
 
                 <li> <b>N/A</b> - not possible to determine at the moment</li>
 
                 <li> <b>N/A</b> - not possible to determine at the moment</li>
 
             </ul>
 
             </ul>

Revision as of 02:25, 11 May 2020

The information in this page is updated in accordance with firmware version [[Media:{{{series}}}_R_00.02.03_WEBUI.bin|{{{series}}}_R_00.02.03]].

Summary

The Network page contains information related to the device's networking. This chapter is an overview of the Network page in {{{name}}} devices. If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

[[File:Networking_{{{series}}}_manual_webui_basic_advanced_mode.gif|border|class=tlt-border]]

LAN

This tab displays information about the device's local network(s). The figure below is an example of the Network window: Networking rutx manual network lan v1.png

lan information
Name LAN interface name
IP address IP address of the LAN interface
Netmask Netmask of the LAN interface. In a sense, a netmask specifies the size of a network. In other words, it indicates which part of the IP address denotes the network, and which denotes the device
dhcp leases
Hostname Hostname of a LAN client
IP address IP address of a LAN client
MAC address MAC address of a LAN client
Leasetime remaining Remaining lease time for a DHCP client. Active DHCP lease holders will try to renew their DHCP leases after a half of the lease time passes.



[[Category:{{{name}}} Status section]]