Difference between revisions of "Template:Networking rutos manual ntp"

From Teltonika Networks Wiki
Line 1: Line 1:
<!-- Template uses {{{name}}}, {{{series}}} {{{gps}}}(ifeq 1)  -->
<!-- Template uses {{{name}}}, {{{series}}} {{{gps}}}(ifeq 1)  -->
| fw_version = {{{series}}}_R_00.02.03.1
| fw_version = {{{series}}}_R_00.02.04.1
| series    = {{{series}}}
| series    = {{{series}}}

Revision as of 07:34, 3 July 2020

The information in this page is updated in accordance with firmware version [[Media:{{{series}}}_R_00.02.04.1_WEBUI.bin|{{{series}}}_R_00.02.04.1]].


Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched, variable-latency data networks. This chapter is an overview of the NTP section for {{{name}}} devices.


The Time Synchronization section lets you select time zone and synchronize the time.

The figure below is an example of the Time Synchronization section and the table below provides information about the fields contained in that section:

File:Networking trb2 ntp general v1.png

Field Value Description
Current system time time; default: none Current local time of the device.
Sync with browser -(interactive button) Click to synchronize device time to browser time, if your device time is not correct. Note - to synchronize to correct time zone you first have to click Save & apply, as Sync with browser button checks currently saved time zone.
Time zone time zone; default: UTC The device will sync time in accordance with the selected time zone.


This section is used to configure NTP client, server and time servers.

NTP Client

File:Networking rutx ntp ntp client v1.png

Field Value Description
Enable NTP Client off | on; default: on Turns NTP on or off.
Force Servers off | on; default: off Forces unreliable NTP servers.
Update interval (in seconds) integer; default: 600 Defines how often the device will update the time.
Offset frequency integer; default: 0 Adjusts the minor drift of the clock so that it will run more accurately.

Time servers

The Time Servers section displays the NTP servers that the device uses. You are provided with 4 default time servers (as seen in the example below), but you can also add custom time servers by clicking the "Add" button or you can edit the given time servers.

File:Networking rutx ntp ntp time servers v1.png

NTP Server

The device can also act as an NTP Server, providing clock synchronization to other devices in the network. From this section you can turn this feature on or off:

File:Networking rutx ntp ntp server v1.png

[[Category:{{{name}}} Services section]]