31,703
edits
Changes
Template:Networking rutos manual rs232 (view source)
Revision as of 10:33, 3 July 2020
, 10:33, 3 July 2020no edit summary
This manual page provides an overview of the RS232 page in {{{name}}} devices.
This manual page provides an overview of the RS232 page in {{{name}}} devices.
{{#ifeq:{{{series}}}|TRB14X|
==General information==
==RS232 connector pinout==
The RS232 connector type on this device is a '''DCE female'''. DCE stands for Data Communication Equipment.
<table class="nd-othertables">
<tr>
<th style="width: 352px" colspan="3">RS232 connector pinout</th>
<th style="width: 250px; border-bottom: 1px solid white;" colspan="1" rowspan="7">[[File:Trb142 rs232 pinout v3.png|200px|right|bottom]]</th>
</tr>
<tr>
<td style="width: 50px;">Pin</td>
<td style="width: 100px;"><b>Name</b></td>
<td><b>Description</b></td>
</tr>
<tr>
<td style="font-weight: normal;">2</td>
<td>RXD</td>
<td>Output</td>
</tr>
<tr>
<td style="font-weight: normal;">3</td>
<td>TXD</td>
<td>Input</td>
</tr>
<tr>
<td style="font-weight: normal;">5</td>
<td>GND</td>
<td>-</td>
</tr>
<tr>
<td style="font-weight: normal;">7</td>
<td>RTS</td>
<td>Input</td>
</tr>
<tr>
<td style="font-weight: normal;">8</td>
<td>CTS</td>
<td>Output</td>
</tr>
</table>
==Cables==
There are two types of RS232 serial devices: '''DTE''' and '''DCE'''. DTE typically refers to the serial port on a PC or terminal, while DCE refers to communication devices. Connectors mounted on DTE are likely to be male, and those mounted on DCE are likely to be female.
This device is DCE and has a female connector.
----
To connect a standard DTE device, use a straight-through Female/Male RS232 cable:
[[File:Services rs232 connector female male.PNG]]
See straight cable pinout below:
[[File:Straight cable pinout v2.png|400px]]
----
To connect another DCE device to RUT955, a Null-modem (crossed) Male/Male cable should be used:
[[File:Male male rs232 cable.jpg]]
See straight crossed cable pinout below:
[[File:Straight crossed rs232 cable pinout v2.png|400px]]
----
Maximum cable length is 15 meters or the cable length equal to a capacitance of 2500 pF (for a 19200 baud rate). Using lower capacitance cables can increase the distance. Reducing communication speed can also increase maximum cable length.|}}
==RS232 Configuration==
==RS232 Configuration==
