9,291
edits
Changes
Template:Networking rutos manual rs232 (view source)
Revision as of 11:03, 12 October 2021
, 11:03, 12 October 2021no edit summary
{{Template:Networking_rutos_manual_fw_disclosure
{{Template: Networking_rutos_manual_fw_disclosure
| fw_version = {{{series}}}_R_00.02.05.1
| fw_version = {{{series}}}_R_00.07.01
| series = {{{series}}}
| series = {{{series}}}
}}
}}
<tr>
<tr>
<td>Serial type</td>
<td>Serial type</td>
<td>[[#Console|Console]] | [[#Over IP|Over IP]] | [[#Modbus gateway|Modbus gateway]]; default: <b>Console</b></td>
<td>[[#Console|Console]] | [[#Over IP|Over IP]] | [[#Modem|Modem]] | [[#Modbus gateway|Modbus gateway]]; default: <b>Console</b></td>
<td>Specifies the serial connection type.<br><b>Look to the sections below for information on different RS232 serial type options.</b></td>
<td>Specifies the serial connection type.<br><b>Look to the sections below for information on different RS232 serial type options.</b></td>
</tr>
</tr>
</tr>
</tr>
</table>
</table>
{{#ifeq: {{{modem}}} | 1 |
===Modem===
----
The <b>Modem</b> serial type is used to manage modem functionality which could be accessed using shell interface. For this purpose you may want use such applications with CR/LF (Carriage Return, Line Feed) capable applications like PuTTY on Windows and microcom, minicom, cutecom or similar applications on Linux.
[[File:Networking_rutos_manual_usb_tools_printer_server_usb_to_serial_modem.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Mode</td>
<td>Partial control {{!}} Full control; default: <b>Partial control</b></td>
<td>Specifies modem control mode. <ul>
<ul>
<li><b>Partial control</b>- enables modem control with AT commands, mobile connection will be controlled by RUTOS.
<li><b>Full control</b>- enables modem control with AT commands, mobile connection will be controlled by user.
</ul>
</td>
</tr>
</table>
|}}
===Modbus gateway===
===Modbus gateway===
</tr>
</tr>
</table>
</table>
==IP Filter==
The <b>IP Filter</b> section is used for configuring which network is allowed to communicate with the device. You may add a new instance by selecting the Interface and pressing Add.
[[File:Networking_rutos_manual_console_ip_filter.png|border|class=tlt-border]]
Then enter the IP address and save.
[[File:Networking_rutos_manual_console_ip_filter_instance.png|border|class=tlt-border]]
[[Category:{{{name}}} Services section]]
[[Category:{{{name}}} Services section]]
