Template:Networking rutos manual system

From Teltonika Networks Wiki
Revision as of 14:13, 17 November 2020 by Dziugas (talk | contribs)

The information in this page is updated in accordance with firmware version [[Media:{{{series}}}_R_00.02.05.1_WEBUI.bin|{{{series}}}_R_00.02.05.1]].

Summary

The System page displays general information related to the hardware, software and memory state of the device.

This chapter of the user manual provides an overview of the System page for {{{name}}} devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

[[File:Networking_{{{series}}}_manual_webui_basic_advanced_mode.gif|border|class=tlt-border]]

System

The figure below is an example of the System page and the table below provides information on the fields contained in that page:


Field Name Description
Device name The device's brand name.
Product code a.k.a., ordering code, displays under which product code the device was manufactured. Different product codes indicate different versions of the overall product. For example, devices with different product codes may support different LTE bands, come with different accessories, different firmware, etc.
Serial number A unique 10-digit device identifier. It is required when connecting the device to Teltonika's Remote Management System (RMS). The device can be added to RMS via the Services → Cloud Solutions → [[{{{name}}}_Cloud_Solutions#RMS|RMS]] page.
Hardware revision A 4-digit number representing the router's hardware revision version.
Batch number A 4-digit number that indicates the batch of materials.
Firmware version Displays the firmware version currently installed in the device. The firmware can be upgraded from the System → [[{{{name}}} Firmware|Firmware]] page.
You can download firmwares for {{{name}}} from [[{{{name}}}_Firmware_Downloads|here]].
Kernel version Displays the device's kernel version. A kernel is a computer program responsible for connecting a device's software to its hardware
Local device time Displays the current time as perceived by the device. Time settings can be adjusted in the Services → [[{{{name}}} NTP|NTP]] page.
Uptime Displays the amount of time that has passed since the device's last start up.
Load average Displays the device's CPU load average (in %) over the last minute, 5 minutes and 15 minutes.
RAM used Displays the amount of currently used random-access memory (RAM).
RAM Buffered Displays the amount of random-access memory (RAM) used by temporarily stored data before moving it to another location.
Flash used Displays the amount of currently used flash memory.

[[Category:{{{name}}} Status section]]