Difference between revisions of "Template:Networking rutos manual vpn"

From Teltonika Networks Wiki
Line 1: Line 1:
 
<!-- Template uses {{{name}}}, {{{series}}}    -->
 
<!-- Template uses {{{name}}}, {{{series}}}    -->
 
{{Template:Networking_rutos_manual_fw_disclosure
 
{{Template:Networking_rutos_manual_fw_disclosure
| fw_version = {{{series}}}_R_00.02.05.1
+
| fw_version = {{{series}}}_R_00.02.06
 
| series    = {{{series}}}
 
| series    = {{{series}}}
 
}}
 
}}
Line 22: Line 22:
 
{{{name}}} devices run OpenVPN version <b>2.4.5</b>.
 
{{{name}}} devices run OpenVPN version <b>2.4.5</b>.
  
===OpenVPN client===
+
===OpenVPN Client===
 
----
 
----
 
An <b>OpenVPN client</b> is an entity that initiates a connection to an OpenVPN server. To create a new client instance, go to the <i>Services → VPN → OpenVPN</i> section, select <i>Role: Client</i>, enter a custom name and click the 'Add' button. An OpenVPN client instance with the given name will appear in the "OpenVPN Configuration" list.
 
An <b>OpenVPN client</b> is an entity that initiates a connection to an OpenVPN server. To create a new client instance, go to the <i>Services → VPN → OpenVPN</i> section, select <i>Role: Client</i>, enter a custom name and click the 'Add' button. An OpenVPN client instance with the given name will appear in the "OpenVPN Configuration" list.
Line 248: Line 248:
 
</ul>
 
</ul>
  
===OpenVPN server===
+
===OpenVPN Server===
 
----
 
----
 
An <b>OpenVPN server</b> is an entity that waits for incoming connections from OpenVPN clients. To create a new server instance, go to the <i>Services → VPN → OpenVPN</i> section, select <i>Role: Server</i>, enter a custom name and click the 'Add' button. An OpenVPN server instance with the given name will appear in the "OpenVPN Configuration" list. Only one OpenVPN server instance is allowed to be added.
 
An <b>OpenVPN server</b> is an entity that waits for incoming connections from OpenVPN clients. To create a new server instance, go to the <i>Services → VPN → OpenVPN</i> section, select <i>Role: Server</i>, enter a custom name and click the 'Add' button. An OpenVPN server instance with the given name will appear in the "OpenVPN Configuration" list. Only one OpenVPN server instance is allowed to be added.
Line 490: Line 490:
 
<b>Generic Routing Encapsulation</b> (<b>GRE</b>) is a tunneling protocol used to establish point-to-point connections between remote private networks. GRE tunnels encapsulate data packets in order to route other protocols over IP networks.
 
<b>Generic Routing Encapsulation</b> (<b>GRE</b>) is a tunneling protocol used to establish point-to-point connections between remote private networks. GRE tunnels encapsulate data packets in order to route other protocols over IP networks.
  
===GRE: main & tunnel settings===
+
===GRE: Main & Tunnel Settings===
 
----
 
----
 
To create a new GRE instance, go to the <i>Services → VPN → GRE</i> section, enter a custom name and click the 'Add' button. A GRE instance with the given name will appear in the "GRE Configuration" list.
 
To create a new GRE instance, go to the <i>Services → VPN → GRE</i> section, enter a custom name and click the 'Add' button. A GRE instance with the given name will appear in the "GRE Configuration" list.
Line 566: Line 566:
 
</table>
 
</table>
  
===GRE: routing settings===
+
===GRE: Routing Settings===
 
----
 
----
 
<b>Routing settings</b> are used to configure routes to networks that are behind the device that hosts the opposite GRE instance. To add a new route, simply click the 'Add' button. For information on configuring the route refer to the figure and table below.
 
<b>Routing settings</b> are used to configure routes to networks that are behind the device that hosts the opposite GRE instance. To add a new route, simply click the 'Add' button. For information on configuring the route refer to the figure and table below.
Line 596: Line 596:
 
To begin configuration, click the button that looks like a pencil located next to the instance.
 
To begin configuration, click the button that looks like a pencil located next to the instance.
  
===IPsec instance===
+
===IPsec Instance===
 
----
 
----
 
The <b>general settings</b> section is used to configure the main IPsec parameters. Refer to the figure and table below for information on the configuration fields located in the general settings section.
 
The <b>general settings</b> section is used to configure the main IPsec parameters. Refer to the figure and table below for information on the configuration fields located in the general settings section.
  
[[File:Networking_rutx_vpn_ipsec_ipsec_configuration_general_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_vpn_ipsec_ipsec_instance_general_settings.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 680: Line 680:
 
</ul>
 
</ul>
  
====Advanced settings====
+
====Advanced Settings====
 
----
 
----
  
Line 705: Line 705:
 
</table>
 
</table>
  
===IPsec instance: connection settings===
+
===IPsec Instance: Connection Settings===
 
----
 
----
  
 
The <b>connection settings</b> section is used to configure the main parameters of an IPsec connection. Refer to the figure and table below for information on the configuration fields located in the connection settings section.
 
The <b>connection settings</b> section is used to configure the main parameters of an IPsec connection. Refer to the figure and table below for information on the configuration fields located in the connection settings section.
  
====General settings====
+
====General Settings====
 
----
 
----
  
[[File:Networking_rutx_vpn_ipsec_ipsec_configuration_connection_settings_v1.png|border|class=tlt-border]]
+
[[File:Networking_rutos_vpn_ipsec_connection_settings_general_settings.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 735: Line 735:
 
             </ul>
 
             </ul>
 
         </td>
 
         </td>
 +
    </tr>
 +
    <tr>
 +
    <td><span style="color: red;">Tunnel:</span> Default route</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Turn on to route all traffic through IPSec tunnel.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 760: Line 765:
 
             </ul>
 
             </ul>
 
         </td>
 
         </td>
    </tr>
 
    <tr>
 
    <td><span style="color: red;">Tunnel:</span> Default route</td>
 
        <td>off {{!}} on; default: <b>off</b></td>
 
        <td>Turn on to route all traffic through IPSec tunnel.</td>
 
 
     </tr>
 
     </tr>
 
</table>
 
</table>
Line 781: Line 781:
 
----
 
----
  
[[File:Networking_rutx_vpn_ipsec_ipsec_configuration_connection_settings_advanced_v1.png|border|class=tlt-border]]
+
[[File:Networking_rutos_vpn_ipsec_connection_settings_advanced_settings.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 865: Line 865:
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
     <td><span style="color: red;">Tunnel:</span> Passthrough</td>
+
     <td><span style="color: red;">Tunnel:</span> Passthrough interfaces</td>
         <td>interface(s); default: <b>none</b></td>
+
         <td>network interfaces; default: <b>none</b></td>
         <td>Choose interface(s) for passthrough.</td>
+
         <td>Network interfaces to include in IPsec Passthrough.</td>
 +
    </tr>
 +
    <tr>
 +
    <td><span style="color: red;">Tunnel:</span> Passthrough subnets</td>
 +
        <td>ip/netmask; default: <b>none</b></td>
 +
        <td>Networks to include in IPsec Passthrough.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
Line 1,027: Line 1,032:
 
===PPTP client===
 
===PPTP client===
 
----
 
----
A <b>PPTP client</b> is an entity that initiates a connection to a PPTP server. To create a new client instance, go to the <i>Services → VPN → PPTP</i> section, select <i>Role: Client</i>, enter a custom name and click the 'Add' button. A PPTP client instance with the given name will appear in the "PPTP Configuration" list.
+
A <b>PPTP client</b> is an entity that initiates a connection to a PPTP server. To create a new client instance, go to the <i>Services → VPN → PPTP</i> section, select <i>Role: Client</i>, enter a custom name and click the 'Add' button:
 +
 
 +
[[File:Networking_rutos_vpn_pptp_client_add_button.png|border|class=tlt-border]]
  
To begin configuration, click the button that looks like a pencil next to the client instance. Refer to the figure and table below for information on the PPTP client's configuration fields:
+
You should be redirected to the configuration page for the newly added PPTP Client which should look similar to this:
  
[[File:Networking_rutx_vpn_pptp_client_configuration_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_vpn_pptp_client.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 1,067: Line 1,074:
 
===PPTP server===
 
===PPTP server===
 
----
 
----
A <b>PPTP server</b> is an entity that waits for incoming connections from PPTP clients. To create a new server instance, go to the <i>Services → VPN → PPTP</i> section, select <i>Role: Server</i>, enter a custom name and click the 'Add' button. A PPTP server instance with the given name will appear in the "PPTP Configuration" list. Only one PPTP server instance is allowed to be added.
+
A <b>PPTP server</b> is an entity that waits for incoming connections from PPTP clients. To create a new server instance, go to the <i>Services → VPN → PPTP</i> section, select <i>Role: Server</i>, enter a custom name and click the 'Add' button:
  
A server needs to have a [[Private_and_Public_IP_Addresses#Public_IP_address|public IP address]] in order to be available from the public network (the Internet).
+
[[File:Networking_rutos_vpn_pptp_server_add_button.png|border|class=tlt-border]]
  
To begin configuration, click the button that looks like a pencil next to the server instance. Refer to the figure and table below for information on the PPTP server's configuration fields:
+
You should be redirected to the configuration page for the newly added PPTP Server which should look similar to this:
  
[[File:Networking_rutx_vpn_pptp_server_configuration_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_vpn_pptp_server.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 1,102: Line 1,109:
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
       <td>User name</td>
+
       <td>Timeout</td>
       <td>string; default: '''none'''</td>
+
      <td>integer; default: <b>none</b></td>
 +
      <td>Time in seconds. If no packets pass through the tunnel between this server and a client, the server will terminate the connection to that client after the amount of time specified in this field passes.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Primary DNS</td>
 +
      <td>ip; default: <b>none</b></td>
 +
      <td>IP address of the primary DNS server.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Secondary DNS</td>
 +
      <td>ip; default: <b>none</b></td>
 +
      <td>IP address of the secondary DNS server.</td>
 +
    </tr>
 +
</table>
 +
----
 +
The <b>User List</b> section is used to user authentication settings required to successfully connect to this server. The list is empty by default. Click the 'Add' button to create a new PPTP User:
 +
 
 +
[[File:Networking_rutos_vpn_pptp_server_user_list_add_button.png|border|class=tlt-border]]
 +
 
 +
[[File:Networking_rutos_vpn_pptp_server_user_list.png|border|class=tlt-border]]
 +
 
 +
<table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Username</td>
 +
       <td>string; default: <b>none</b></td>
 
       <td>Username used for authentication to this PPTP server.</td>
 
       <td>Username used for authentication to this PPTP server.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
       <td>Password</td>
 
       <td>Password</td>
       <td>string; default: '''none'''</td>
+
       <td>string; default: <b>none</b></td>
 
       <td>Password used for authentication to this PPTP server.</td>
 
       <td>Password used for authentication to this PPTP server.</td>
 
     </tr>
 
     </tr>
Line 1,118: Line 1,154:
 
</table>
 
</table>
  
 +
<b>Note:</b> there can only one PPTP Server configuration on the device.
 
{{#ifeq:{{{series}}}|RUTX|      <!--      ONLY FOR RUTX        -->
 
{{#ifeq:{{{series}}}|RUTX|      <!--      ONLY FOR RUTX        -->
 
==SSTP==
 
==SSTP==
Line 1,132: Line 1,169:
 
Refer to the figure and table below for information on the SSTP instance's configuration fields:
 
Refer to the figure and table below for information on the SSTP instance's configuration fields:
  
[[File:Networking_rutx_vpn_sstp_configuration_v1.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_vpn_sstp_sstp_instance.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 1,189: Line 1,226:
 
Refer to the figure and table below for information on the fields contained in the Stunnel Globals section.
 
Refer to the figure and table below for information on the fields contained in the Stunnel Globals section.
  
[[File:Networking_rutx_vpn_stunnel_globals_v1.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_vpn_stunnel_globals.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 1,237: Line 1,274:
 
Refer to the figure and table below for information on the Stunnel instance's configuration fields:
 
Refer to the figure and table below for information on the Stunnel instance's configuration fields:
  
[[File:Networking_rutx_vpn_stunnel_instance_v1.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_vpn_stunnel_configuration.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 1,335: Line 1,372:
 
To begin configuration, click the button that looks like a pencil located next to the instance. Refer to the figures and tables below for information on the DMVPN instance configuration:
 
To begin configuration, click the button that looks like a pencil located next to the instance. Refer to the figures and tables below for information on the DMVPN instance configuration:
  
[[File:Networking_rutx_vpn_dmvpn_dmvpn_parameters_configuration_v1.png]]
+
[[File:Networking_rutos_manual_vpn_dmvpn_dmvpn_parameters_configuration.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 1,366: Line 1,403:
 
<br>
 
<br>
 
----
 
----
[[File:Networking_rutx_vpn_dmvpn_gre_parameters_configuration_v1.png]]
+
[[File:Networking_rutos_manual_vpn_dmvpn_gre_parameters_configuration.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 1,504: Line 1,541:
 
To begin configuration, click the button that looks like a pencil next to the client instance. Refer to the figure and table below for information on the L2TP client's configuration fields:
 
To begin configuration, click the button that looks like a pencil next to the client instance. Refer to the figure and table below for information on the L2TP client's configuration fields:
  
[[File:Networking_rutx_vpn_l2tp_client_configuration_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_vpn_l2tp_client.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">

Revision as of 15:07, 7 December 2020

Template:Networking rutos manual fw disclosure

Summary

Virtual Private Network (VPN) is a method of connecting multiple private networks across the Internet. VPNs can serve to achieve many different goals, but some of its main purposes are:

  • access between remote private networks;
  • data encryption;
  • anonymity when browsing the Internet.

This page is an overview of the different types of VPNs supported by {{{name}}} devices.

OpenVPN

OpenVPN is an open-source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. It is often regarded as being the most universal VPN protocol because of its flexibility, support of SSL/TLS security, multiple encryption methods, many networking features and compatibility with most OS platforms.

{{{name}}} devices run OpenVPN version 2.4.5.

OpenVPN Client


An OpenVPN client is an entity that initiates a connection to an OpenVPN server. To create a new client instance, go to the Services → VPN → OpenVPN section, select Role: Client, enter a custom name and click the 'Add' button. An OpenVPN client instance with the given name will appear in the "OpenVPN Configuration" list.

To begin configuration, click the button that looks liek a pencil next to the client instance. Refer to the figure and table below for information on the OpenVPN client's configuration fields:

Networking trb2 vpn openvpn client configuration v2.png

Field Value Description
Enable off | on; default: off Turns the OpenVPN instance on or off.
Enable external Services off | on; default: off Turns the OpenVPN external Services on or off.
VPN providers Express VPN | Nord VPN; default: Nord VPN Represents a list of available VPN providers.
VPN servers United Kingdom | USA | Australia | South Africa | Custom; default: United Kingdom Represents a list of available VPN servers.
Enable OpenVPN config from file off | on; default: off Enables or disables custom OpenVPN config from file.
Username string; default: none Username used for authentication to the VPN server.
Password string; default: none Password used for authentication to the VPN server.
TUN/TAP TUN (tunnel) | TAP (bridged); default: TUN (tunnel) Virtual network device type.
  • TUN - a virtual point-to-point IP link which operates at the network layer (OSI layer 3), used when routing is required.
  • TAP - a virtual Ethernet adapter (switch), operates at the data link layer (OSI layer 2), used when bridging is required.
Protocol UDP | TCP; default: UDP Transfer protocol used by the OpenVPN connection.
  • Transmission Control Protocol (TCP) - most commonly used protocol in the Internet Protocol (IP) suite. It ensures the recipient will receive packets in the order they were sent by numbering, analysing response messages, checking for errors and resending them if an issue occurs. It should be used when reliability is crucial (for example, in file transfer).
  • User Datagram Protocol (UDP) - packets are sent to the recipient without error-checking or back-and-forth quality control, meaning that when packets are lost, they are gone forever. This makes it less reliable but faster than TCP; therefore, it should be used when transfer speed is crucial (for example, in video streaming, live calls).
Port integer [0..65535]; default: 1194 TCP/UDP port number used for the connection. Make sure it matches the port number specified on the server side.
NOTE: traffic on the selected port will be automatically allowed in the device firewall rules.
LZO Yes | No | None; default: None Turns LZO data compression on or off.
Encryption DES-CBC 64 | RC2-CBC 128 | DES-EDE-CBC 128 | DES-EDE3-CBC 192 | DESX-CBC 192 | BF-CBC 128 | RC2-40-CBC 40 | CAST5-CBC 128 | RC2-40CBC 40 | CAST5-CBC 128 | RC2-64-CBC 64| AES-128-CBC 128 | AES-192-CBC 192 | AES-256-CBC 256 | none; default: BF-CBC 128 Algorithm used for packet encryption.
Authentication TLS | Static Key | Password | TLS/Password; default: TLS Authentication mode, used to secure data sessions.
  • Static key is a secret key used for server–client authentication.
  • TLS authentication mode uses X.509 type certificates:
    • Certificate Authority (CA)
    • Client certificate
    • Client key
    All mentioned certificates can be generated using OpenVPN or Open SSL utilities on any type of host machine. One of the most popular utilities used for this purpose is called Easy-RSA.
  • Password is a simple username/password based authentication where the owner of the OpenVPN server provides the login data.
  • TLS/Password uses both TLS and username/password authentication.
TLS: TLS cipher All | DHE+RSA | Custom; default: All Packet encryption algorithm cipher.
TLS: Allowed TLS ciphers All | DHE+RSA | Custom; default: All A list of TLS ciphers accepted by this connection.
Remote host/IP address ip; default: none IP address or hostname of an OpenVPN server.
Resolve retry integer | infinite; default: infinite In case server hostname resolve fails, this field indicates the amount of time (in seconds) to retry the resolve. Specify infinite to retry indefinitely.
Keep alive two integers separated by a space; default: none Defines two time intervals: the first is used to periodically send ICMP requests to the OpenVPN server, the second one defines a time window, which is used to restart the OpenVPN service if no ICMP response is received during the specified time slice. When this value is specfiied on the OpenVPN server, it overrides the 'keep alive' values set on client instances.
Example: 10 120
Static key: Local tunnel endpoint IP ip; default: none IP address of the local OpenVPN network interface.
Static key: Remote tunnel endpoint IP ip; default: none IP address of the remote OpenVPN network (server) interface.
Remote network IP address ip; default: none LAN IP address of the remote network (server).
Remote network IP netmask netmask; default: none LAN IP subnet mask of the remote network (server).
Password: User name string; default: none Username used for authentication to the OpenVPN server.
Password: Password string; default: none Password used for authentication to the OpenVPN server.
Extra options string; default: none Extra OpenVPN options to be used by the OpenVPN instance.
Certificate files from device off | on; default: off Turn on this option if you want to select generated certificate files from device.
TLS/Password: HMAC authentication algorithm none | SHA1 | SHA256 | SHA384 | SHA512; default: SHA1 HMAC authentication algorithm type.
TLS/Password: Additional HMAC authentication off | on; default: off An additional layer of HMAC authentication on top of the TLS control channel to protect against DoS attacks.
TLS/Password: HMAC authentication key .key file; default: none Uploads an HMAC authentication key file.
TLS/Password: HMAC key direction 0 | 1 | none; default: 1 The value of the key direction parameter should be complementary on either side (client and server) of the connection. If one side uses 0, the other side should use 1, or both sides should omit the parameter altogether.
TLS/Password: Certificate authority .ca file; default: none Certificate authority is an entity that issues digital certificates. A digital certificate certifies the ownership of a public key by the named subject of the certificate.
TLS: Client certificate .crt file; default: none Client certificate is a type of digital certificate that is used by client systems to make authenticated requests to a remote server. Client certificates play a key role in many mutual authentication designs, providing strong assurances of a requester's identity.
TLS: Client key .key file; default: none Authenticates the client to the server and establishes precisely who they are.
TLS: Private key decryption password (optional) string; default: none A password used to decrypt the server's private key. Use only if server's .key file is encrypted with a password.
Static key: Static pre-shared key .key file; default: none Uploads a secret key file used for server–client authentication.

Additional notes:

  • Some configuration fields become available only when certain other parameters are selected. The names of the parameters are followed by a prefix that specifies the authentication type under which they become visible. Different color codes are used for different prefixes:
    • Red for Authentication: TLS
    • Purple for Authentication: Static key
    • Blue for Authentication: Password
  • After changing any of the parameters, don't forget to click the Save & Apply button located at the bottom-right side of the page.

OpenVPN Server


An OpenVPN server is an entity that waits for incoming connections from OpenVPN clients. To create a new server instance, go to the Services → VPN → OpenVPN section, select Role: Server, enter a custom name and click the 'Add' button. An OpenVPN server instance with the given name will appear in the "OpenVPN Configuration" list. Only one OpenVPN server instance is allowed to be added.

A server needs to have a public IP address in order to be available from the public network (the Internet).

To begin configuration, click the button that looks like a pencil next to the server instance. Refer to the figure and table below for information on the OpenVPN server's configuration fields:

Networking rutx vpn openvpn server configuration v2.png

Field Value Description
Enable off | on; default: off Turns the OpenVPN instance on or off.
Enable OpenVPN config from file off | on; default: off Enables or disables custom OpenVPN config from file.
TUN/TAP TUN (tunnel) | TAP (bridged); default: TUN (tunnel) Virtual network device type.
  • TUN - a virtual point-to-point IP link which operates at the network layer (OSI layer 3), used when routing is required.
  • TAP - a virtual Ethernet adapter (switch), operates at the data link layer (OSI layer 2), used when bridging is required.
Protocol UDP | TCP; default: UDP Transfer protocol used by the OpenVPN connection.
  • Transmission Control Protocol (TCP) - most commonly used protocol in the Internet Protocol (IP) suite. It ensures the recipient will receive packets in the order they were sent by numbering, analysing response messages, checking for errors and resending them if an issue occurs. It should be used when reliability is crucial (for example, file transfer).
  • User Datagram Protocol (UDP) - packets are sent to the recipient without error-checking or back-and-forth quality control, meaning that when packets are lost, they are gone forever. This makes it less reliable but faster than TCP; therefore, it should be used when transfer speed is crucial (for example, video streaming, live calls).
Port integer [0..65535]; default: 1194 TCP/UDP port number used for the connection. Make sure it matches the port number specified on the server side.
NOTE: traffic on the selected port will be automatically allowed in device firewall rules.
LZO Yes | No | None; default: None Turns LZO data compression on or off.
Encryption DES-CBC 64 | RC2-CBC 128 | DES-EDE-CBC 128 | DES-EDE3-CBC 192 | DESX-CBC 192 | BF-CBC 128 | RC2-40-CBC 40 | CAST5-CBC 128 | RC2-40CBC 40 | CAST5-CBC 128 | RC2-64-CBC 64| AES-128-CBC 128 | AES-192-CBC 192 | AES-256-CBC 256 | none; default: BF-CBC 128 Algorithm used for packet encryption.
Authentication TLS | Static Key | TLS/Password; default: TLS Authentication mode, used to secure data sessions.
  • Static key is a secret key used for server–client authentication.
  • TLS authentication mode uses X.509 type certificates:
    • Certificate Authority (CA)
    • Client certificate
    • Client key
    All mentioned certificates can be generated using OpenVPN or Open SSL utilities on any type of host machine. One of the most popular utilities used for this purpose is called Easy-RSA.
  • TLS/Password uses both TLS and username/password authentication.
Static key: Local tunnel endpoint IP ip; default: none IP address of the local OpenVPN network interface.
Static key: Remote tunnel endpoint IP ip; default: none IP address of the remote OpenVPN network (client) interface.
Static key: Remote network IP address ip; default: none LAN IP address of the remote network (client).
Static key: Remote network IP netmask netmask; default: none LAN IP subnet mask of the remote network (client).
TLS/TLS/Password: TLS cipher All | DHE+RSA | Custom; default: All Packet encryption algorithm cipher.
TLS/Password: Allowed TLS ciphers All | DHE+RSA | Custom; default: All A list of TLS ciphers accepted by this connection.
TLS/TLS/Password: Client to client off | on; default: off Allows OpenVPN clients to communicate with each other on the VPN network.
TLS/TLS/Password: Keep alive two integers separated by a space; default: none Defines two time intervals: the first is used to periodically send ICMP requests to the OpenVPN server, the second one defines a time window, which is used to restart the OpenVPN service if no ICMP response is received during the specified time slice. When this value is specifiied on the OpenVPN server, it overrides the 'keep alive' values set on client instances.
Example: 10 120
TLS/TLS/Password: Virtual network IP address ip; default: none IP address of the OpenVPN network.
TLS/TLS/Password: Virtual network netmask netmask; default: none Subnet mask of the OpenVPN network.
TLS/TLS/Password: Push option OpenVPN options; default: none Push options are a way to "push" routes and other additional OpenVPN options to connecting clients.
TLS/TLS/Password: Allow duplicate certificates off | on; default: off When enabled allows multiple clients to connect using the same certificates.
TLS/Password: User name string; default: none Username used for authentication to this OpenVPN server.
TLS/Password: Password string; default: none Password used for authentication to this OpenVPN server.
Static key: Static pre-shared key .key file; default: none Uploads a secret key file used for server–client authentication.
TLS/TLS/Password: Certificate authority .ca file; default: none Certificate authority is an entity that issues digital certificates. A digital certificate certifies the ownership of a public key by the named subject of the certificate.
TLS/TLS/Password: Server certificate .crt file; default: none A type of digital certificate that is used to identify the OpenVPN server.
TLS/TLS/Password: Server key .key file; default: none Authenticates clients to the server.
TLS/TLS/Password: Diffie Hellman parameters .pem file; default: none DH parameters define how OpenSSL performs the Diffie-Hellman (DH) key-exchange.
TLS/TLS/Password: CRL file (optional) .pem file | .crl file; Default: none A certificate revocation list (CRL) file is a list of certificates that have been revoked by the certificate authority (CA). It indicates which certificates are no longer acccepted by the CA and therefore cannot be authenticated to the server.

Additional notes:

  • Some configuration fields become available only when certain other parameters are selected. The names of the parameters are followed by a prefix that specifies the authentication type under which they become visible. Different color codes are used for different prefixes:
    • Red for Authentication: TLS
    • Purple for Authentication: Static key
    • Blue for Authentication: TLS/Password
  • After changing any of the parameters, don't forget to click the Save & Apply button located at the bottom-right side of the page.

TLS Clients


TLS Clients is a way to differentiate clients by their Common Names (CN), which are found in the client certificate file. It can be used to assign specific VPN addresses to corresponding clients and bind them to their LAN addresses, making the server aware of which client has which LAN IP address.

The TLS Clients section can be found in the OpenVPN Server configuration window, provided that the OpenVPN server uses TLS or TLS/Password authentication methods. To create a new TLS client, type in the new client‘s name in the text field found bellow the TLS Clients tab and click the 'Add' button. Refer to the figure and table below for information on the TLS Clients' configuration fields:

Networking rutos vpn openvpn tls clients.png

Field Value Description
Endpoint name string; default: none A custom name for the client.
Common name (CN) string; default: none Client’s Common Name (CN) found in the client certificate file.
Virtual local endpoint ip; default: none Client’s local address in the virtual network.
Virtual remote endpoint ip; default: none Client’s remote address in the virtual network.
Private network ip; default: none Client’s private network (LAN) IP address.
Private netmask netmask; default: none Client’s private network (LAN) IP netmask.

GRE

Generic Routing Encapsulation (GRE) is a tunneling protocol used to establish point-to-point connections between remote private networks. GRE tunnels encapsulate data packets in order to route other protocols over IP networks.

GRE: Main & Tunnel Settings


To create a new GRE instance, go to the Services → VPN → GRE section, enter a custom name and click the 'Add' button. A GRE instance with the given name will appear in the "GRE Configuration" list.

To begin configuration, click the button that looks like a pencil located next to the instance. Refer to the figure and table below for information on the fields located in the GRE instance configuration section.

Networking rutx vpn gre gre configuration main settings v2.png

Field Value Description
Enabled off | on; default: off Turns the GRE instance on or off.
Tunnel source network interface; default: none Network interface used to establish the GRE Tunnel.
Remote endpoint IP address ip; default: none External IP address of another GRE instance used to establish the initial connection between peers.
MTU integer; default: 1476 Sets the maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.
TTL integer [0..255]; default: 255 Sets a custom TTL (Time to Live) value for encapsulated packets. TTL is a field in the IP packet header which is initially set by the sender and decreased by 1 on each hop. When it reaches 0 it is dropped and the last host to receive the packet sends an ICMP "Time Exceeded" message back to the source.
Outbound key integer [0..65535]; default: none A key used to identify outgoing packets. This value should match the "Inbound key" value set on the opposite GRE instance or both key values should be omitted on both sides.
Inbound key integer [0..65535]; default: none A key used to identify incoming packets. This value should match the "Outbound key" value set on the opposite GRE instance or both key values should be omitted on both sides.
Path MTU Discovery off | on; default: on When unchecked, sets the nopmtudisc option for tunnel. Can not be used together with the TTL option.
Keep alive off | on; default: off Turns "keep alive" on or off. The "keep alive" feature sends packets to the remote instance in order to determine the health of the connection. If no response is received, the device will attempt to re-establish the tunnel.
Keep alive interval integer [0..255]; default: none Frequency (in seconds) at which "keep alive" packets are sent to the remote instance.
Local GRE interface IP address ip; default: none IP address of the local GRE Tunnel network interface.
Local GRE interface netmask netmask; default: none Subnet mask of the local GRE Tunnel network interface.

GRE: Routing Settings


Routing settings are used to configure routes to networks that are behind the device that hosts the opposite GRE instance. To add a new route, simply click the 'Add' button. For information on configuring the route refer to the figure and table below.

Networking rutx vpn gre gre configuration routing settings v2.png

Field Value Description
Remote subnet IP address ip; default: none IP address of the network behind the device that hosts the remote GRE instance.
Remote subnet netmask netmask; default: none Subnet mask of the network behind the device that hosts the remote GRE instance.

IPsec

To create a new IPsec instance, go to the Services → VPN → IPsec section, enter a custom name and click the 'Add' button. An IPsec instance with the given name will appear in the "IPsec Configuration" list.

To begin configuration, click the button that looks like a pencil located next to the instance.

IPsec Instance


The general settings section is used to configure the main IPsec parameters. Refer to the figure and table below for information on the configuration fields located in the general settings section.

Networking rutos vpn ipsec ipsec instance general settings.png

Field Value Description
Enable off | on; default: off Turns the IPsec instance on or off.
Remote endpoint host | ip; default: none IP address or hostname of the remote IPsec instance.
Authentication method Pre-shared key | X.509; default: Pre-shared key Specify authentication method. Choose between Pre-shared key and X.509 certificates.
Pre-shared key: Pre shared key string; default: none A shared password used for authentication between IPsec peers before a secure channel is established.
Certificate files from device off | on; default: off Turn on this option if you want to select generated certificate files from device.
X.509: Key .key file; default: none A public key file.
X.509: Local Certificate .pem file; default: none A local certificate file.
X.509: CA Certificate .crt file; default: none A certificate authority file.
Local identifier ip | string; default: none Defines how the user (left participant) will be identified during authentication.
  • IP - Internet Protocol address.
  • FQDN - identity defined by fully qualified domain name. It is the complete domain name for a host (for example, something.somedomain.com). Only supported with IKEv2.
Remote identifier ip | string; default: none Defines how the right participant will be identified during authentication.
  • IP - Internet Protocol address.
  • FQDN - identity defined by fully qualified domain name. It is the complete domain name for a host (for example, something.somedomain.com). Only supported with IKEv2.

Additional notes:

  • Some configuration fields become available only when certain other parameters are selected. The names of the parameters are followed by a prefix that specifies the authentication type under which they become visible. Different color codes are used for different prefixes:
    • Chocolate for Authentication method: Pre-shared key
    • Dark red for Authentication method: X.509

Advanced Settings


The Advanced settings section is only visible when X.509 is selected as Authentication method.

Networking rutos vpn ipsec ipsec instance advanced settings.png

Field Value Description
Certificate files from device off | on; default: off Uses certificate file generated on this device instead of uploading. (You can generate certificates within this device via the System → Administration → [[{{{name}}}_Administration#Certificates|Certificates]] page.)
Remote Certificate .crt file; default: none Selects a certificate file either from this device or from a computer.

IPsec Instance: Connection Settings


The connection settings section is used to configure the main parameters of an IPsec connection. Refer to the figure and table below for information on the configuration fields located in the connection settings section.

General Settings


Networking rutos vpn ipsec connection settings general settings.png

Field Value Description
Mode Start | Add | Route; default: Start Specifies which operation will be done automatically at IPSec startup.
Type Tunnel | Transport; default: Tunnel Type of connection.
  • Tunnel - protects internal routing information by encapsulating the entire IP packet (IP header and payload); commonly used in site-to-site VPN connections; supports NAT traversal.
  • Transport - only encapsulates IP payload data; used in client-to-site VPN connections; does not support NAT traversal; usually implemented with other tunneling protocols (for example, L2TP).
Tunnel: Default route off | on; default: off Turn on to route all traffic through IPSec tunnel.
Tunnel: Local subnet ip/netmask | default: none Local IP address and subnet mask used to determine which part of the network can be accessed in the VPN network. Netmask range [0..32]. If left empty, IP address will be selected automatically.
Tunnel: Remote subnet ip/netmask; default: none Remote network IP address and subnet mask used to determine which part of the network can be accessed in the VPN network. Netmask range [0..32]. This value must differ from the device’s LAN IP.
Transport: Bind to GRE interface; default: none Bind to GRE interface to create GRE over IPsec.
Key exchange IKEv1 | IKEv2; default: IKEv1 Internet Key Exchange (IKE) version used for key exchange.
  • IKEv1 - more commonly used but contains known issues, for example, dealing with NAT.
  • IKEv2 - updated version with increased and improved capabilities, such as integrated NAT support, supported multihosting, deprecated exchange modes (does not use main or aggressive mode; only 4 messages required to establish a connection).

Additional notes:

  • Some configuration fields become available only when certain other parameters are selected. The names of the parameters are followed by a prefix that specifies the authentication type under which they become visible. Different color codes are used for different prefixes:
    • Red for Type: Tunnel
    • Purple for Type: Transport

Advanced settings


Networking rutos vpn ipsec connection settings advanced settings.png

Field Value Description
Aggressive off | on; default: off Turn aggressive mode on or off for outgoing connections. Aggressive mode performs fewer exchanges (a total of 4 messages) than Main mode (a total of 6 messages) by storing most data into the first exchange. In aggressive mode, the information is exchanged before there is a secure channel, making it less secure but faster than main mode.
Aggressive mode is available only with IKEv1; if IKEv2 is selected this field becomes hidden.
Force encapsulation off | on; default: off Forces UDP encapsulation for ESP packets even if a "no NAT" situation is detected.
Local firewall off | on; default: on Adds necessary firewall rules to allow traffic of this IPsec instance on this device.
Remote firewall off | on; default: on Adds necessary firewall rules to allow traffic of from the opposite IPsec instance on this device.
Inactivity integer; default: none Defines timeout interval, after which a CHILD_SA is closed if it did not send or receive any traffic.
Dead Peer Detection off | on; default: off A function used during Internet Key Exchange (IKE) to detect a "dead" peer. It used to reduce traffic by minimizing the number of messages when the opposite peer in unavailable and as failover mechanism.
Dead Peer Detection: DPD action Restart | Hold | Clear | None; default: Restart Controls the use of the Dead Peer Detection protocol where notification messages are periodically sent in order to check the liveliness of the IPsec peer.
Dead Peer Detection: DPD Delay integer; default: none The frequency of sending R_U_THERE messages or INFORMATIONAL exchanges to peer.
Tunnel: Remote source IP ip; default: none The internal source IP to use in a tunnel for the remote (right) peer.
Tunnel: Local source IP ip; default: none The internal (left) source IP to use in a tunnel, also known as virtual IP.
Tunnel: Remote DNS ip; default: none List of DNS server addresses to exchange as configuration attributes. On the responder, only fixed IPv4/IPv6 addresses are allowed and define DNS servers assigned to the client.
Locally allowed protocols string; default: none Allowed protocols and ports over connection, also called Port Selectors. Defines in form of 'protocol/port' eg:'17/1701' or '17/%any' or 'udp/l2f'.
Remotely allowed protocols string; default: none Allowed protocols and ports over connection, also called Port Selectors. Defines in form of 'protocol/port' eg:'17/1701' or '17/%any' or 'udp/l2f'.
Custom option string; default: none Add custom connection parameters.
Local source IP ip; default: none The internal (left) source IP to use in a tunnel, also known as virtual IP.
Tunnel: Passthrough interfaces network interfaces; default: none Network interfaces to include in IPsec Passthrough.
Tunnel: Passthrough subnets ip/netmask; default: none Networks to include in IPsec Passthrough.

Additional notes:

  • Some configuration fields become available only when certain other parameters are selected. The names of the parameters are followed by a prefix that specifies the authentication type under which they become visible. Different color codes are used for different prefixes:
    • Red for Type: Tunnel
    • Blue for Dead Peer Detection: Enabled

IPsec instance: proposal settings


The proposal settings section is used to configure IKE (Internet Key Exchange) phase 1 & 2 settings. IKE is a protocol used to set up security associations (SAs) for the IPsec connection. This process is required before any IPsec tunnel can be established. It is done in two phases:

Phase Mode
Phase 1
  • Establishes a secure channel between peers
  • Authenticates peers
  • Negotiates SA policy
  • Shares secret keys
  • Establishes secure tunnel for phase 2
Main mode (figure 1)
  • 6 packets exchanged
  • Identity protected during exchange
Aggressive mode (figure 2)
  • 3 packets exchanged
  • Identity information exchanged before a secure channel is established
Phase 2
  • Sets up matching IPsec SAs
  • Periodically renegotiates IPsec SAs
Quick mode
  • 3 packets exchanged
  • IPsec SA parameters (ESP/AH, SHA/MD5) established
  • SA lifetime set


Figure 1

Figure 2

Networking device vpn ipsec main mode scheme v3.png Networking device vpn ipsec aggressive mode scheme v4.png

Phase 1


Networking rutx vpn ipsec ipsec configuration proposal settings phase1 v1.png

Field Value Description
Encryption algorithm 3DES | AES 128 | AES 192 | AES 256 | AES128 GCM8 | AES192 GCM8 | AES256 GCM8 | AES128 GCM12 | AES192 GCM12 | AES256 GCM12 | AES128 GCM16 | AES192 GCM16 | AES256 GCM16; default: AES 128 Algorithm used for data encryption.
Authentication MD5 | SHA1 | SHA256 | SHA384 | SHA512; default: SHA1 Algorithm used for exchanging authentication and hash information.
DH group MODP768 | MODP1024 | MODP1536 | MODP2048 | MODP3072 | MODP4096 | ECP192 | ECP224 | ECP256 | ECP384 | ECP521; default: MODP1536 Diffie-Hellman (DH) group used in the key exchange process. Higher group numbers provide more security, but take longer and use more resources to compute the key. Must match with another incoming connection to establish IPSec.
Force crypto proposal off | on; default: off Only chosen proposals will be used when turned on.
IKE Lifetime string; default: none How long the keying channel of a connection (ISAKMP or IKE SA) should last before being renegotiated. The time is specified in seconds. The s, m, h and d suffixes explicitly define the units for seconds, minutes, hours and days, respectively.

Phase 2


Networking rutx vpn ipsec ipsec configuration proposal settings phase2 v1.png

Field Value Description
Hash algorithm 3DES | AES 128 | AES 192 | AES 256 | AES128 GCM8 | AES192 GCM8 | AES256 GCM8 | AES128 GCM12 | AES192 GCM12 | AES256 GCM12 | AES128 GCM16 | AES192 GCM16 | AES256 GCM16; default: AES 128 Algorithm used for data encryption.
Hash algorithm MD5 | SHA1 | SHA256 | SHA384 | SHA512; default: SHA1 Algorithm used for exchanging authentication and hash information.
PFS group MODP768 | MODP1024 | MODP1536 | MODP2048 | MODP3072 | MODP4096 | ECP192 | ECP224 | ECP256 | ECP384 | ECP521; default: MODP1536 The PFS (Perfect Forward Secrecy). Must match with another incoming connection to establish IPSec.
Force crypto proposal off | on; default: off Only chosen proposals will be used when turned on.
Lifetime string; default: none How long the keying channel of a connection (ISAKMP or IKE SA) should last before being renegotiated. The time is specified in seconds. The s, m, h and d suffixes explicitly define the units for seconds, minutes, hours and days, respectively.

PPTP

Point-to-Point Tunneling Protocol (PPTP) is a type of VPN protocol that uses a TCP control channel and a Generic Routing Encapsulation tunnel to encapsulate PPP packets.

PPTP client


A PPTP client is an entity that initiates a connection to a PPTP server. To create a new client instance, go to the Services → VPN → PPTP section, select Role: Client, enter a custom name and click the 'Add' button:

Networking rutos vpn pptp client add button.png

You should be redirected to the configuration page for the newly added PPTP Client which should look similar to this:

Networking rutos vpn pptp client.png

Field Value Description
Enable off | on; default: off Turns the PPTP instance on or off.
Server ip | host; default: none IP address or hostname of a PPTP server.
Username string; default: none Username used for authentication to the PPTP server.
Password string; default: none Password used for authentication to the PPTP server.
Default route off | on; default: off When turned on, this connection will become the device default route. This means that all traffic directed to the Internet will go through the PPTP server and the server's IP address will be seen as this device's source IP to other hosts on the Internet.

PPTP server


A PPTP server is an entity that waits for incoming connections from PPTP clients. To create a new server instance, go to the Services → VPN → PPTP section, select Role: Server, enter a custom name and click the 'Add' button:

Networking rutos vpn pptp server add button.png

You should be redirected to the configuration page for the newly added PPTP Server which should look similar to this:

Networking rutos vpn pptp server.png

Field Value Description
Enable off | on; default: off Turns the PPTP instance on or off.
Local IP ip; default: 192.168.0.1 IP address of this PPTP network interface.
Remote IP range start ip; default: 192.168.0.20 PPTP IP address leases will begin from the address specified in this field.
Remote IP range end ip; default: 192.168.0.30 PPTP IP address leases will end with the address specified in this field.
Timeout integer; default: none Time in seconds. If no packets pass through the tunnel between this server and a client, the server will terminate the connection to that client after the amount of time specified in this field passes.
Primary DNS ip; default: none IP address of the primary DNS server.
Secondary DNS ip; default: none IP address of the secondary DNS server.

The User List section is used to user authentication settings required to successfully connect to this server. The list is empty by default. Click the 'Add' button to create a new PPTP User:

Networking rutos vpn pptp server user list add button.png

Networking rutos vpn pptp server user list.png

Field Value Description
Username string; default: none Username used for authentication to this PPTP server.
Password string; default: none Password used for authentication to this PPTP server.
PPTP Client's IP ip; default: none Assigns an IP address to the client that uses the adjacent authentication info. This field is optional and if left empty the client will simply receive an IP address from the IP pool defined above.

Note: there can only one PPTP Server configuration on the device.


L2TP

In computer networking, Layer 2 Tunneling Protocol (L2TP) is a tunneling protocol used to support virtual private networks (VPNs). It is more secure than PPTP but, because it encapsulates the transferred data twice, but it is slower and uses more CPU power.

L2TP client


An L2TP client is an entity that initiates a connection to an L2TP server. To create a new client instance, go to the Services → VPN → L2TP section, select Role: Client, enter a custom name and click the 'Add' button. An L2TP client instance with the given name will appear in the "L2TP Configuration" list.

To begin configuration, click the button that looks like a pencil next to the client instance. Refer to the figure and table below for information on the L2TP client's configuration fields:

Networking rutos manual vpn l2tp client.png

Field Value Description
Enable off | on; default: off Turns the L2TP instance on or off.
Server ip | host; default: none IP address or hostname of an L2TP server.
Username string; default: none Username used for authentication to the L2TP server.
Password string; default: none Password used for authentication to the L2TP server.
Default route off | on; default: off When turned on, this connection will become device default route. This means that all traffic directed to the Internet will go through the L2TP server and the server's IP address will be seen as this device's source IP to other hosts on the Internet.

L2TP server


An L2TP server is an entity that waits for incoming connections from L2TP clients. To create a new server instance, go to the Services → VPN → L2TP section, select Role: Server, enter a custom name and click the 'Add' button. An L2TP server instance with the given name will appear in the "L2TP Configuration" list. Only one L2TP server instance is allowed to be added.

A server needs to have a public IP address in order to be available from the public network (the Internet).

To begin configuration, click the button that looks like a pencil next to the server instance. Refer to the figure and table below for information on the L2TP server's configuration fields:

Networking rutx vpn l2tp server configuration v2.png

Field Value Description
Enable off | on; default: off Turns the L2TP instance on or off.
Local IP ip; default: 192.168.0.1 IP address of this L2TP network interface.
Remote IP range begin ip; default: 192.168.0.20 L2TP IP address leases will begin from the address specified in this field.
Remote IP range end ip; default: 192.168.0.30 L2TP IP address leases will end with the address specified in this field.
User name string; default: user Username used for authentication to this L2TP server.
Password string; default: pass Password used for authentication to this L2TP server.
L2TP Client's IP ip; default: none Assigns an IP address to the client that uses the adjacent authentication info. This field is optional and if left empty the client will simply receive an IP address from the IP pool defined above.

L2TPv3

L2TPv3 (Layer Two Tunneling Protocol Version 3) is a point-to-point layer two over IP tunnel. This means you can tunnel L2 protocols like Ethernet, Frame-relay, ATM, HDLC, PPP, etc. over an IP network.

Local settings


Networking rutos vpn l2tpv3 configuration local settings v1.png

Field Value Description
Enable off | on; default: off Turns the L2TPv3 instance on or off.
Local address ip; default: none IP address of device's WAN. Note: If left empty, it will take IP address automatically from main WAN interface.
Tunnel ID integer [1..4294967295]; default: none Uniquely identifies the tunnel. The value used must match the peer tunnel ID value being used at the peer.
Session ID integer [1..4294967295]; default: none The value used must match the tunnel ID value being used at the peer.
Cookie string; default: none Must be specified in hexidecimal form and be length of 8 or 16. eg.: 89ABCDEF.

Peer settings


Networking rutos vpn l2tpv3 configuration peer settings v1.png

Field Value Description
Peer address ip; default: none Peer Endpoint IP address.
Peer Tunnel ID integer [1..4294967295]; default: none ID of peer's tunnel is specified from 1 to 4294967295. It must match other end tunnel ID.
Peer Session ID integer [1..4294967295]; default: none UID of peer's session is specified from 1 to 4294967295. It must match other end session ID.
Peer Cookie string; default: none Must be specified in hexidecimal form and be length of 8 or 16. eg.: 89ABCDEF. It must match other end Cookie.

Instance Settings


Networking rutos vpn l2tpv3 configuration instance settings v1.png

Field Value Description
Bridge to None | LAN; default: None Peer Endpoint IP address.
IP Address ip; default: none IP address of standalone L2TPv3 interface.
Netmask netmask; default: none Netmask of standalone L2TPv3 interface.
MTU integer [64..9000]; default: none Sets the maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.
Encapsulation IP | UDP; default: IP Specify technology to use when connecting to other end.
Layer 2 specific header type None | Linux Default; default: Linux Default It might be neccessary to set this option to none when using other hardware.

WireGuard

WireGuard is simple, fast, lean, and modern VPN that utilizes secure and trusted cryptography. It intends to be more performant than OpenVPN. WireGuard is designed as general purpose VPN, fit for many different circumstances and while it is currently under heavy development, it already might be regarded as the most secure, easiest to use, and simplest VPN solution.

Note: WireGuard is additional software that can be installed from the Services → [[{{{name}}} Package Manager|Package Manager]] page.

WireGuard works by adding an interface which acts as a tunnel. To create one enter its name and click the Add button. To configure it click the Edit Networking rutx manual edit button v1.png button.

Networking rutx vpn wireguard v1.png


General Instance Settings


This section contains General settings of created WireGuard Instance. Here you can find its Public and Private keys and generate them, specify Port and IP addresses for communication.

Networking rutx vpn wireguard instance general v1.png

Field Value Description
Enable off | on; default: off Turns WireGuard Instance on or off.
Private Key string; default: none Private Key used in authentication.
Public Key string; default: - Public Key used in authentication.
Generate -(interactive button) Click to generate Public Key and Private Key.
Listen Port integer [0..65535]; default: none Specify port to listen for incomming connections. It will be set to a random integer if left empty.
IP Addresses ip; default: none A single IP address or a list of them for this instance associated with public keys.


Advanced Settings


Advanced Settings section contains Metric and MTU configuration for this WireGuard interface. Networking rutx vpn wireguard instance advanced v1.png

Field Value Description
Metric positive integer; default: none Specify metric for this tunnel interface. Lower number means higher priority.
MTU integer [1280..1420]; default: none Maximum Transmission Unit for this tunnel interface.


Peers


The Peers section is used to create and configure all the peers for this interface. To create one enter its name and click the Add button. To configure it click the Edit Networking rutx manual edit button v1.png button. Networking rutx vpn wireguard instance peer v2.png


General Peer Settings


In the General section of Peer instance you can configure basic information about the endpoint to allow communications. Networking rutx vpn wireguard instance peer instance general v1.png

Field Value Description
Public Key string; default: none Endpoint's Public Key.
Allowed IPs ip; default: none A single IP address or a list of them which are allowed to communicate with this peer.


Advanced Peer Settings


In the Advanced section of Peer instance you are able to configure additional settings such as its Description, Endpoint Host and Port, Preshared Key and other. See more information below. Networking rutx vpn wireguard instance peer instance advanced v1.png

Field Value Description
Description string; default: none Description of this peer.
Pre-Shared Key string; default: none Base64-encoded preshared key. Adds in an additional layer of symmetric-key cryptography for post-quantum resistance.
Route Allowed IPs off | on; default: off Enable to create routes for Allowed IPs for this peer.
Endpoint Host ip | url; default: none IP or URL of Remote Endpoint.
Endpoint Port integer [0..65535]; default: none Specify port to connect to Remote Endpoint. It will be set to 51820 if left empty.
Persistent Keep Alive integer [0..65535]; default: none Specify time amount in seconds between Keep Alive messages. By default this option is 0 which means it is disabled. Recommended value for a device behind NAT is 25.

[[Category:{{{name}}} Services section]]