Difference between revisions of "Template:Networking trb14x first start device configuration"

From Teltonika Networks Wiki
(Created page with "==Device configuration== 1. Power on the device and connect the USB cable to your computer. <br> 2. Allow the gateway to boot up. This might take up to 30 s. <br> 3. Your com...")
 
m (Protected "Template:Networking trb14x first start device configuration" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
 
(No difference)

Latest revision as of 10:24, 19 February 2019

Device configuration

1. Power on the device and connect the USB cable to your computer.
2. Allow the gateway to boot up. This might take up to 30 s.
3. Your computer's OS should detect the USB device and install the drivers for the virtual NDIS network adapter. IP address is set automatically via DHCP.
4. Use a Web browser to go to gateway's default address: http://192.168.2.1
5. Use the following credentials to login:
Tr142 qsg device configuration 1 v2.png
6. Go to the WebUI's Status → Overview page to check the signal strength:
Tr142 qsg device configuration 2 v2.png