Template:Networking trb2 manual input output status
From Teltonika Networks Wiki
Revision as of 09:40, 4 November 2020 by Dziugas (talk | contribs) (Created page with " ioman.adc.adc0 ioman.gpio.dio0 ioman.gpio.dio1 ioman.gpio.dio2 Call command <b>ubus call <u>value</u> status </b>: root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.dio0...")
ioman.adc.adc0 ioman.gpio.dio0 ioman.gpio.dio1 ioman.gpio.dio2
Call command ubus call value status :
root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.dio0 status { "value": "0", "direction": "out", "bi_dir": true, "invert_input": false }
- dio0 is configurable input / output:
- "value": "0" means low level state.
- "value": "1" means high level state.
- adc0 is analog input:
- "value": "0.54" means 0.54V.