Editing Template:Rms faq enable remote access

Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
 
<br>
 
[[File:How to enable remote access for RMS.gif]]
 
 
<br>
 
 
1. Open your web browser ant type in the router's LAN IP address ('''192.168.1.1''' by default) into the URL field and press the "Enter" key:
 
1. Open your web browser ant type in the router's LAN IP address ('''192.168.1.1''' by default) into the URL field and press the "Enter" key:
  
Line 18: Line 13:
 
Default login values are Username: '''admin'''; Password: '''admin01''' (this is the default password for RUT routers, but you will be prompted to change it during you first login. If this is not your first login, use the password you chose before).
 
Default login values are Username: '''admin'''; Password: '''admin01''' (this is the default password for RUT routers, but you will be prompted to change it during you first login. If this is not your first login, use the password you chose before).
  
<br>
 
3. When you completed the login, navigate to the '''System''' menu and click on the '''Administration''' field:
 
 
[[File:RMS-Webui-system-administration.png]]
 
  
<br>
+
* When you completed the login, navigate to the '''System''' menu and click on the '''Administration''' field:
4. From the Administration Settings window go to the '''RMS''' section located near the top of the page:
 
  
[[File:RMS-menu-bar-RMS.png]]
+
[[File:Enabling remote access for rms part 3 v4.png]]
 +
----
 +
* From the Administration Settings window go to the '''RMS''' section located near the top of the page:
  
<br>
+
[[File:Enabling remote access for rms part 4 v3.png]]
5. Place a check mark next to the '''Enable remote monitoring''' field and don't forget to save the changes:
+
----
 +
* Place a check mark next to the '''Enable remote monitoring''' field and don't forget to save the changes:
  
 
[[File:RMS-connection-settings-for-webui.jpg]]
 
[[File:RMS-connection-settings-for-webui.jpg]]
  
 
'''NOTE''': if you are adding more than one device, don't forget to do this for each separate device.
 
'''NOTE''': if you are adding more than one device, don't forget to do this for each separate device.

Please note that all contributions to Teltonika Networks Wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see Teltonika Networks Wiki:Copyrights for details). Do not submit copyrighted work without permission!

Cancel Editing help (opens in new window)