Difference between revisions of "Template:Rms faq enable remote access"

 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
  
* Open your web browser ant type in the router's LAN IP address ('''192.168.1.1''' by default) into the URL field and press the "Enter" key:
+
<br>
 +
[[File:How to enable remote access for RMS.gif]]
  
[[File:Enabling remote access for rms part 1 v2.png]]
+
<br>
----
+
1. Open your web browser ant type in the router's LAN IP address ('''192.168.1.1''' by default) into the URL field and press the "Enter" key:
* Next, you will be greeted with the Login window. Type in your login information and click "Login":
 
  
[[File:Enabling remote access for rms part 2 v2.png]]
+
<br>
 +
[[File:RMS-19216811-router-adress.png]]
  
'''NOTE''': default login values are Username: '''admin'''; Password: '''admin01''' (this is the default password for RUT routers, but you will be prompted to change it during you first login. If this is not your first login, use the password you chose before).
+
<br>
----
+
2. Next, you will be greeted with the Login window. Type in your login information and click "Login":
* When you completed the login, navigate to the '''System''' menu and click on the '''Administration''' field:
 
  
[[File:Enabling remote access for rms part 3 v2.png]]
+
[[File:RMS-router-authorization-required.png]]
----
 
* From the Administration Settings window go to the '''RMS''' section located near the top of the page:
 
  
[[File:Enabling remote access for rms part 4 v2.png]]
+
'''<span style="color:#0455a4"><big>Important!</big></span>'''
----
+
<br>
* Place a check mark next to the '''Enable remote monitoring''' field:
+
Default login values are Username: '''admin'''; Password: '''admin01''' (this is the default password for RUT routers, but you will be prompted to change it during you first login. If this is not your first login, use the password you chose before).
  
[[File:Enabling remote access for rms part 5 v2.png]]
+
<br>
 +
3. When you completed the login, navigate to the '''System''' menu and click on the '''Administration''' field:
 +
 
 +
[[File:RMS-Webui-system-administration.png]]
 +
 
 +
<br>
 +
4. From the Administration Settings window go to the '''RMS''' section located near the top of the page:
 +
 
 +
[[File:RMS-menu-bar-RMS.png]]
 +
 
 +
<br>
 +
5. Place a check mark next to the '''Enable remote monitoring''' field and don't forget to save the changes:
 +
 
 +
[[File:RMS-connection-settings-for-webui.jpg]]
  
 
'''NOTE''': if you are adding more than one device, don't forget to do this for each separate device.
 
'''NOTE''': if you are adding more than one device, don't forget to do this for each separate device.

Latest revision as of 08:47, 12 July 2019


How to enable remote access for RMS.gif


1. Open your web browser ant type in the router's LAN IP address (192.168.1.1 by default) into the URL field and press the "Enter" key:


RMS-19216811-router-adress.png


2. Next, you will be greeted with the Login window. Type in your login information and click "Login":

RMS-router-authorization-required.png

Important!
Default login values are Username: admin; Password: admin01 (this is the default password for RUT routers, but you will be prompted to change it during you first login. If this is not your first login, use the password you chose before).


3. When you completed the login, navigate to the System menu and click on the Administration field:

RMS-Webui-system-administration.png


4. From the Administration Settings window go to the RMS section located near the top of the page:

RMS-menu-bar-RMS.png


5. Place a check mark next to the Enable remote monitoring field and don't forget to save the changes:

RMS-connection-settings-for-webui.jpg

NOTE: if you are adding more than one device, don't forget to do this for each separate device.