Difference between revisions of "Template:Rms manual management commands access"

From Teltonika Networks Wiki
 
Line 51: Line 51:
 
# For this example, I used another Teltonika Networks device that was connected to the RMS device's LAN. Therefore, when I click the link, I am redirected to WebUI login page.
 
# For this example, I used another Teltonika Networks device that was connected to the RMS device's LAN. Therefore, when I click the link, I am redirected to WebUI login page.
  
===Remove device from access list===
+
===Remove from device access list===
 
----
 
----
  

Latest revision as of 21:57, 31 January 2021

To configure device access go to the RMS web page, Left sidebar panel, (Management → Devices) and click on Devices submenu.

Move your mouse pointer to the Top control Actions menu and select Device Access (Actions → Device Access).

RMS-device-menu-left-sidebar-panel.jpg RMS-top-menu-actions-access.jpg


Configure device access[edit source]


  1. Make sure that the device for which you would like to set up remote access is physically connected to the router's LAN or WAN (depends on your configuration).
  2. Locate and select that device in the device table.
  3. Move your mouse pointer to the Actions menu and click Device Access.
  4. New pop-up window will open, click the plus sign Rms plus symbol.png to create a new row.
  5. Fill out the new row will appropriate data (look for example in the table below). When ready, click "Save".
  6. Enter a custom name for the device (for easier management purposes), the device's destination IP address, and the device's destination port.

The next Actions status pop-up will display the status of your request. If update is successful in the Status column you will you will get a message: LAN device(s) created successfully.


Field Value Description
Name For example: RUT955 A custom name for the LAN device.
Destination IP For example: 192.168.1.2 The device’s LAN IP address.
Destination Port Default: 80 The destination device's WebUI HTTP port.


Connect to device[edit source]


RMS-device-details-button.png

  1. You can then find remote access links in the Device details page. You can find this page by clicking the "Device Information" icon located under the Actions column in the Device table, next to the relevant device.
  2. You will be redirected to the device's Device details page. By default, the Device access widget will be at the bottom of that page. Locate the custom name for the device you created in previous steps.
  3. A Device Web UI link pop-up window will open. Click the Generate button.
  4. A new link will appear in the window. Click the link to connect to the device.
  5. For this example, I used another Teltonika Networks device that was connected to the RMS device's LAN. Therefore, when I click the link, I am redirected to WebUI login page.

Remove from device access list[edit source]


RMS-remove-device-access.png

  1. You can later delete device access entries by once again selecting the device and clicking "Access" from the Actions menu.
  2. When the new pop-window opens click the Remove access listing icon next to the entry that you would like to delete.

RMS-access-deleted.png

At the top of your screen, you will get a notification in green text: Device access deleted.