Difference between revisions of "Template:Rms manual management commands reboot"

From Teltonika Networks Wiki
(Created page with "The '''Reboot''' function is used to reboot devices selected from your device table. ---- * First select the device(s) that you wish to reboot: File:How to reboot device fr...")
 
Line 17: Line 17:
 
[[File:How to reboot device from rms part 4 v1.png]]
 
[[File:How to reboot device from rms part 4 v1.png]]
  
'''NOTE''': your devices will be unreachable for a few minutes and show as "Offline" in RMS.
+
'''NOTE''': your devices will be unreachable for a few minutes and shown as "Offline" in RMS.

Revision as of 13:59, 14 May 2018

The Reboot function is used to reboot devices selected from your device table.


  • First select the device(s) that you wish to reboot:

How to reboot device from rms part 1 v1.png


  • Scroll your mouse pointer to the Commands submenu (Management → Commands) and click "Reboot":

How to reboot device from rms part 2 v1.png


  • You will be prompted by a pop-up asking whether you really want to reboot the selected device(s). If you're ready to proceed, click "Yes":

How to reboot device from rms part 3 v1.png


  • The next pop-up box will display the status of each device. If the reboot request was successful, a green check mark with the words "This router won't be reachable for few minutes" will appear under the "Event" field for each device. At this point you can close the pop-up box:

How to reboot device from rms part 4 v1.png

NOTE: your devices will be unreachable for a few minutes and shown as "Offline" in RMS.