Difference between revisions of "Template:Rms manual management commands update fw"

From Teltonika Networks Wiki
(10 intermediate revisions by 2 users not shown)
Line 1: Line 1:
The '''Update FW''' function is used to update the firmware(s) of devices selected from your device table.  
+
To '''Update firmware''' firmware for device(s) selected from your device table go to the RMS web page, Left sidebar panel, (<b>Management → Devices</b>) and click on <b>Devices</b> submenu.
 +
 
 +
Move your mouse pointer to the Top control '''Actions''' menu and select '''Update firmware''' (Actions → Update firmware).
 +
 
 +
[[File:RMS-device-menu-left-sidebar-panel.jpg]] [[File:RMS-top-menu-actions-update-firmware.jpg]]
 +
 
 +
<br>
 +
===Step by step instructions===
 
----
 
----
* Firmware files can be uploaded to RMS via the RMS Files tab for later use (more information '''[[RMS Files: FW files|here]]''') or they can be selected from your computer. Either way, before you upgrade, you'll need to obtain a firmware file. You can download firmwares for different RUT devices from these links:
+
Read step by step instructions to learn how to update firmware for your device(s).
** [[RUT2xx Firmware]]
+
 
** [[RUT8xx Firmware]]
+
# Select the device(s) that you wish to update
** [[RUT9xx Firmware]]
+
# Move your mouse pointer to the '''Actions''' menu and click "Update firmware".
----
+
# After a pop-up window will appear. Select the '''Latest firmware''' or '''Mass product''' from the top of the list. You also can select the firmware you have previously uploaded.
* Select the device(s) that you wish to update:
+
# Click the '''Set update''' button, you will get a pop-up window showing firmware upload progress.
+
# After the firmware upload has complete in the Status column you will you will get a message: '''<span style="color:#6CAF8F">✔</span> Done'''.
[[File:How to update fw from rms part 1 v3.png|1150px]]
+
# You can safely close the pop-up window by clicking '''Close''' button.
----
+
 
* Scroll your mouse pointer to the Commands submenu ('''Management → Commands''') and click "Update FW":
+
'''<span style="color:#0455a4"><big>Important!</big></span>'''
 +
* Allow some time for your device(s) to update. They wont be reachable for up to 1-2 minute(s).  
 +
* When the <span style="color:#BC5265">⬤</span> red circle ('''Offline''') will change to <span style="color:#6CAF8F">⬤</span> green circle ('''Online''') the device(s) have been updated and now are fully operational.
  
[[File:How to update fw from rms part 2 v6.png]]
+
Your device(s) will be unreachable for a few minutes and will thus be shown as "Offline". The power button symbols located next to each device in the device table indicate the monitoring status of these devices. When it turns green, the firmware updates will have finished and the device(s) will be seen as "Online" in RMS.
----
 
* Choose a firmware that was previously uploaded to RMS ('''[[RMS Files: FW files]]''') or click the "[[File:Choose file icon.png|16px]] Choose a file..." button to upload a firmware file from your computer and click "Submit":
 
  
[[File:How to update fw from rms part 3 v1.png]]
+
===Download firmware manually===
 
----
 
----
* You will be prompted to confirm the firmware update. Click "Yes" if you wish to proceed:
+
Firmware files can be uploaded to RMS via the RMS Files page or they can uploaded from your computer. You can download firmware for different devices from these links:
  
[[File:How to update fw from rms part 4 v1.png]]
+
* [[RUT230 Firmware Downloads]]
----
+
* [[RUT240 Firmware Downloads]]
* Allow some time for the firmware to be uploaded into the router (progress will be shown under the "Event" field) until a green check mark shows up with the text "This router won't be reachable for few minutes" next to it. You can then close the pop-up box:
+
* [[RUT850 Firmware Downloads]]
 +
* [[RUT900 Firmware Downloads]]
 +
* [[RUT950 Firmware Downloads]]
 +
* [[RUT955 Firmware Downloads]]
 +
* [[RUT955 Firmware Downloads]]
  
[[File:How to update fw from rms part 5 v1.png]]
+
<br>
----
+
* [[RUTX08_Firmware_Downloads]]
* Your router(s) will be unreachable for a few minutes and will thus be shown as "Offline". The power button symbols located next to each device in the device table indicate the monitoring status of these devices. When it turns green, the firmware updates will have finished and the router(s) will be seen as "Online" in RMS:
+
* [[RUTX09_Firmware_Downloads]]
 +
* [[RUTX10_Firmware_Downloads]]
 +
* [[RUTX11_Firmware_Downloads]]
 +
* [[RUTX12_Firmware_Downloads]]
 +
* [[RUTXR1_Firmware_Downloads]]
  
[[File:How to update fw from rms part 6 v2.png|1150px]]
+
<br>
 +
* [[TRB140_Firmware_Downloads]]
 +
* [[TRB141_Firmware_Downloads]]
 +
* [[TRB142_Firmware_Downloads]]
 +
* [[TRB145_Firmware_Downloads]]
 +
* [[TRB245_Firmware_Downloads]]
 +
* [[TRB255_Firmware_Downloads]]

Revision as of 21:49, 31 January 2021

To Update firmware firmware for device(s) selected from your device table go to the RMS web page, Left sidebar panel, (Management → Devices) and click on Devices submenu.

Move your mouse pointer to the Top control Actions menu and select Update firmware (Actions → Update firmware).

RMS-device-menu-left-sidebar-panel.jpg RMS-top-menu-actions-update-firmware.jpg


Step by step instructions


Read step by step instructions to learn how to update firmware for your device(s).

  1. Select the device(s) that you wish to update
  2. Move your mouse pointer to the Actions menu and click "Update firmware".
  3. After a pop-up window will appear. Select the Latest firmware or Mass product from the top of the list. You also can select the firmware you have previously uploaded.
  4. Click the Set update button, you will get a pop-up window showing firmware upload progress.
  5. After the firmware upload has complete in the Status column you will you will get a message: Done.
  6. You can safely close the pop-up window by clicking Close button.

Important!

  • Allow some time for your device(s) to update. They wont be reachable for up to 1-2 minute(s).
  • When the red circle (Offline) will change to green circle (Online) the device(s) have been updated and now are fully operational.

Your device(s) will be unreachable for a few minutes and will thus be shown as "Offline". The power button symbols located next to each device in the device table indicate the monitoring status of these devices. When it turns green, the firmware updates will have finished and the device(s) will be seen as "Online" in RMS.

Download firmware manually


Firmware files can be uploaded to RMS via the RMS Files page or they can uploaded from your computer. You can download firmware for different devices from these links: